What voltage should the data and clock lines use for these 12 volt strips?

Hi friend,our ALITOVE 5m WS2813 LED Strip working voltage and max current is 12V 6A. Here is wiring guidance. Red wire: 12V+ / Black Wire: GDN / Yellow wire: Data / Green wire: Backup Data And plz ignore the clock port.

can I connect two of these in series for total length of 32.8 ft? Does it have a connector on both ends?

Yes you can. Both ends come with connector and additional power wire for power injection. Plz test each roll with 12V power first before installing,and after connect 2rolls together,don't forget to inject power at both ends. Red wire: 12V+ / Black Wire: GND / Yellow wire: Backup Data / Green wire: Data / →: Data transmission direction ---Make sure LED strip 12V+ / GND / Data connect correspondingly to the controller port,otherwise,the strip won't run smoothly. Red wire to controller's VCC port, Green wire to controller's Data port, Yellow wire and Black wire to controller's GND port. Or ignore the Yellow wire,just use Red wire,Green wire,Black wire to controller's VCC,Data,GND port. And plz set RGB,WS2811 for WS2815 strip.

What type of remote I need for WS 2815?

To let our 16.4ft WS2815 300LEDs Strip work,you can use our 12V 8A Power Supply and below controllers. Our ALITOVE WS2815 led strip is 4pin wire,it should comes with additional 4pin connector while most controllers comes with 3pin connector for WS2812B led strip. Just connect the additional 4pin connector to the 3pin controller and then connect to led strip's 4pin connector is ok. Red wire: 12V+ / Black Wire: GND / Yellow wire: Backup Data / Green wire: Data / →: Data transmission direction ---Make sure LED strip 12V+ / GND / Data connect correspondingly to the controller port,otherwise,the strip won't run smoothly. Red wire to controller VCC port, Green wire to controller Data port, Yellow wire and Black wire to controller GND port. Or ignore the Yellow wire,just use Red wire,Green wire,Black wire to controller VCC,Data,GND port. And plz set RGB,WS2811 for WS2815 strip on APP. 12V 8A Power Supply --- https://www.amazon.com/dp/B07G5BQGYD?ref=myi_title_dp SP105E Bluetooth Controller --- https://www.amazon.com/dp/B01LW1J10W SP107E Bluetooth Music Controller --- https://www.amazon.com/dp/B07H15ZC8D SP108E SP108E WiFi Controller --- https://www.amazon.com/dp/B07DDB6JHJ SP110E Bluetooth App Controller --- https://www.amazon.com/dp/B07G77YD9L SP601E Bluetooth Dream Color LED Controller --- https://www.amazon.com/dp/B089Q4TW3J?ref=myi_title_dp

Are the connectors waterproof and are the controllers waterproof?

No,just zthe led strip with silicone tubing,the connector of the strip isn't waterproof.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Desert Online General Trading LLC

Dubai, United Arab Emirates

Description

【12V WS2813 LED Strip】 WS2815 LED strip is upgraded version of 5V WS2813 / WS2812B LED strip. For 5M LED strip, even if all the LEDs are turned on full white, 12V version has no voltage drop. You don’t need to inject power as frequently as 5V version.
【Dual-signal wires】 Designed with one data wire and one backup data wire. . Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.
【Individually addressable】Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.
【Wide compatibility】It can be programmed with Arduino, Raspberry Pi, Fadecandy, T1000S etc. It can also be controlled by SP105E SP108E pre-programmed app controllers and SP107E Colorful x2 sound activated music controllers.
【User-friendly Design】Designed with 4pin JST-SM connectors on both ends for easy hooking up. Separate power/ground wires on both ends for injecting power in case of voltage drop. Covered by waterproof silicone tube, which protects it very well and makes it easy to clean, up to IP67 waterproof.

Parameter Model: WS2815BK150WP Light source: 5050 RGB LED LED Qty: 30pcs per meter Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm The gray level: 256 Color: full color (24-bit ) View angle:120° Voltage: DC 12V Power: 14.4W/M Protection level: Waterproof IP67 FPCB board color: Black Dimension: 5000*14*4mm Package: 16.4ft/roll Life span:≥50000hrs Working environment: -40℃to +80℃ Red wire: 12V+ / Black Wire: GDN / Yellow wire: Data / Green wire: Backup Data Pin Function 12V: Power Voltage, connect to “+12V” DO: Control data signal output DI: Control data signal input BO: Backup control data signal output BI: Backup control data signal input GND: Data &Power Grounding Package 1x 16.4ft 150 pixels WS2815 led strip (Power supply and controller are not included) 1x Female 4PIN JST connector 5x silicone clips 10x mini screws

Brand	ALITOVE
Manufacturer	ALITOVE
Product Dimensions	500 x 12 x 4 cm; 45.36 g
Item model number	AL2815BK150WP
Part Number	AL2815BK150WP
Number of Items	1
Style	Classic
Colour	Black Fpcb
Shape	Linear
Material	Plastic
Number of Lights	300
Included Components	Female 4PIN JST connector, 5x silicone clips, 10x mini screws
Maximum Compatible Wattage	36 Watts
Voltage	12 Volts
Special features	Dimmable
Shade Material	Plastic
Light Direction	Adjustable
Power and Plug Description:	DC
Batteries included?	No
Batteries Required?	No
Type of Bulb	LED
Wattage	36 watts
Item Weight	45.4 g
Guaranteed software updates until	unknown

ALITOVE 12V WS2813 WS2812B RGB Addressable LED Strip Light WS2815 Programmable Digital LED Pixel Light Strip 16.4ft/5m 150 LEDs Waterproof IP67 Black PCB for Arduino Raspberry Pi Project

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions