Dragon Grips Grip Tape Cell Phone Grip Stickers Mouse Grip Tape. Black 5"x7" Multi Purpose Rubberized Grip Stickers. Rubber Grip Adhesive Strips for Phone, Laptop, iPad, iPhone, Tablets & Gaming 2 Pk

The only downside is that the pictures of this product advertises lead me to believe I was receiving two separate packs of two. It shows two separate packs and each pack indicates there are two in each. The product itself is absolutely outstanding and everything I was hoping for. I 100% recommend to anyone looking to enhance the grip on the application that fits them best. Using a heat gun to apply only ensures better results with said application. Thank you so much for producing the quality you advertise

I think the 2-5"x7" sheets package is a better value. Supplying some pics to show it was fairly easy to custom cut and fit to my case. Cut a sheet to a little oversize with sissors. I stuck one edge to a side, then wrapped it around slowly to the other side and used a drywall knife to trim it. Took out a small pie piece on the corners so it didn't pucker. Notice how tight I was able to wrap the sides, beauty. Have had product on for 6 weeks and no sign of release yet. Agree with the claim that it significantly increases grip,..yet still slips in pocket well. I carry mine there 90% of time. Does not significantly increase size. Have not tried to remove. Have a full sheet left for another phone case someday. Skol

I actually bought this to use as grip pads underneath a keyboard wrist rest I made, and it's very slim, so works well for that, but it's not as grippy as I expected. I think Talon grips may be better, but I've also yet to apply these Dragon grips to something using heat to apply, and that may make them a bit tackier. But out of the package, they feel pretty slick, not grippy or tacky at all.

When I received the Dragon Texturized Grip Tape, I knew I had my work "cut" out for me, literally... These sheets hold very well (Dragon Bite, LOL!). Even though I had to eyeball my measurements, cutting out panels for my gaming mouse came out pretty good! If you look carefully, the difficulty presented by the contours of the mouse were mitigated by separating the cut into smaller panels.It may not look "thick" but that's ok; I appreciate how I was able to fold it around the body of my mouse. I can't drop it now and extended sessions don't feel clammy from sweating.Full Disclosure: I turned off my mouse and wrapped it in a cloth so that I could hold the panels in place without the interference of moisture or debris. I applied each panel by pressing them into place from one side/corner to the other to achieve the results depicted in my photos.I love the material, I love the tactile sensation of the grip and I'm glad I purchased this product!I'd be very happy if my comments and experience helped you!Be well!

I purchased this to use on a plastic belt attachment to keep it from slipping on my belt. It did just what I intended with the amount of rubber resistance on the belt. It's easy to use. I first used some rubbing alcohol on a piece of cotton to make sure to remove all of the oil from my fingers. The material is easy to cut to the desired size and the adhesive is ample to hold in the correct position. I did use my heat gun to "set" the adhesive to the fixture. This product is well worth the money.

Dozens of uses! I originally got this to make myself a non-slip “wrap” phone case, since I could not find anything suitable on Amazon. I just traced the outline of my phone, used that as a template, the cut the outline from the sheet of material. It cuts easily yet is very sturdy. No scrapes or breaks or anything. I get the impression it could stand up to quite a beating!I was happy to read the founders’ story, appreciated the personal/non-corporate touch, and made in USA never hurts. I had several scraps left over and have been surprised at the number of uses throughout the house and outdoors.I have had the homemade wrap on my iPhone for two months now, and it’s just starting to peel due to snow getting in my pocket and onto my phone - only I am to blame for that.Once it comes time to replace, I will be sure to follow the instructions and heat it up a bit to ensure the most thorough adhesion.Overall, five stars and for me this falls into the “must-have” category for basic house raw materials for projects. Good stuff!

Backstory: I had/have a battery case for my phone but I also wanted to have a magnetic car mount. The issue was that the battery case was too thick for the magnet to work inside the case. I also didn’t like the idea of the magnet being placed on the outside of the case. I just didn’t think it would look good and it could get dirty etc.So this dragon grip came to the rescue. I was able to have the magnet outside the case but inside the dragon grip to hide it a little bit and keep it secured. Lastly the battery case wasn’t very “grippy” and this dragon grip solved that as well.I was genuinely surprised how well this tape adhered and how grippy it feels and how well it blends in with the rest of the phone/case. Buy it. You won’t be disappointed.

Good stuff and easy to work with. Perfect if you're good with an x-acto knife. Material is great for gripping.

I bought this to replace the pads on my Razer Naga V2 Pro. Since there is pre-cut I went with another brand and this one to try both. I ended up siding with the Dragon Grips as it is neither hard or soft and works really well for my slightly sweaty hands, it won't stick to your fingers at all which I really appreciate. It feels a bit tough at first but softens in a couple of days. 2 sheets is plenty for a long time to come.

Looks and feels great

The grip is nice, it sticks nice to the surface but at this price point I was expecting it to be much slip resistant tbh. It could have been a rubbery feel that would make it much better grip.