Expert Shield *Lifetime Guarantee* - THE Screen Protector for: Nikon D750 (w/top LCD) - Crystal Clear)

Export Shield is one of the most customer oriented online retailers that I've ever dealt with. Despite the simple, low-cost nature of the product, they emailed me to make sure I was completely satisfied with their product. And satisfied I was. The screen protector set for my digital camera came with two shields; a large one for the back LCD and a small one for the top (most only come with the one for the back). They both fit the camera perfectly. The installation instructions were humorous (intentional) and very informational, including tips for removing dust that may get caught under the shield (with all the protectors I've bought over time, I never saw this tip...but it worked!). Installation was easy with convenient tabs to remove the throw-away installation films without causing fingerprints. Unlike most screen protectors, Expert Shield seemed to magically not trap bubbles. I haven't used the camera yet, but the material appears to be very protective. I strongly recommend this screen protector! Bravo to Lynn from Expert Shield...she's awesome!

Since my D750 didn't come with a screen protector like the old Nikon bodies, that meant I was in the market for a screen protector. Not wanting something that uses a sticky adhesive in case I ever wanted to take it off, or replace it, I contemplated getting one of the static adhere GGS glass protectors, but after reading reviews I was less than convinced. In the process, I stumbled across a review comparing the GGS to an Expert Shield. The user sure seemed convinced. After a bit more reading, I decided to give it a go. Ordering/Shipping It was a breeze. With Prime, my order showed up on my doorstep two days later. Yay! Application I have applied many phone screen protectors over the years. From sticky, to water application, I've done them all. Quite honestly, I found it amusing that Expert Shield guarantees no bubbles... Anyway, I have found that applying screen protectors in a steamy bathroom produces best results because there isn't nearly as much static dust flying around. So that is what I did - after getting out of the shower, I gave the screen a final wipe down, making sure that there was no dust or particles of any kind on the screen. I peeled back one edge of the protector and aligned it, and viola! My protector was on! There were a number of bubbles which I used my thumb nail to push out. That seemed to work okay. After peeling off the top layer however, I noticed that there was kind of a funny residue inset just a bit from a couple of the corners. Upon further inspection, it appeared that it was indeed on the underneath side, against the screen. Humph! no way to wipe that off. While slightly annoying to my perfectionist eye, it's not the end of the world because when the screen is on, it cannot be seen. Thus the four stars... Operation While it's only been a day, I don't see why the protector would have any reason to give me trouble. We'll see... If it acts up, then I'll update my review. Otherwise, I expect it to do just what it's supposed to do - protect my D750's screen from scratches. Satisfaction It's not in the way, doesn't stick out like a GGS or similar would, wipes off easy, doesn't darken screen, etc. It's hard to tell it's even there! Yeah, that's my kind of style. For $12, it offers a pretty decent buyers satisfaction. I'll definitely be recommending Expert Shield protectors to friends who are needing screen protectors. Note, I ordered the specific protector for the D750 and it came with a protector for the back screen and the top one as well! That was a nice bonus.

These shields are the best I've used to cover LCDs. They are thick enough to hold up and thin enough to not block the glass. They go on without bubbles and without the need for a scraper - again, the thickness and adhesive make installation easy. I received several of another brand for free when I bought my new camera - and threw them all out. Others bubble, have inconsistent adhesive (corners peel up), or cause some distortion. These don't. An added bonus - a small shield was included to fit over the small LCD display on top (the always-on photo info window near shutter button). I hadn't had one of these included before for other cameras but it's a great idea. It's easy to spread DEET or other chemicals on that when shooting - but this protects it. One more plus - Amazon sent the wrong size. I ordered the Nikon D750 and Amazon sent a Lumix shield. Since the company had sent an email asking for feedback, I thought I'd test how good their service was. I sent them a copy of the order and told them what I received. No problems, no having to return something in perfect packaging (good thing - I opened it before noticing that it was the wrong one). No problems at all. Just a brand new perfect shield in the mail, no questions asked. So I'd have to say that they stand behind the product and customer service is actually responsive and focused on the customer - Wow! I wish all "lifetime guarantees" were like this...

I just received my protector for my Nikon D750, this is not my first screen protector, I've been installing screen protectors for years now for smart phones. I cleaned the rear LCD, peeled the protective mask from the protector to apply it, application went well, the rear protective mask didn't want to come off, the pull tab just separated from the shield. I had to use some tape to get the protective mask to come off. The top LCD protector is significantly undersized on the sides, the shield goes nearly all the way to the edges on the long edges but there's over 1/16th of on inch on the short edges of the protector. It will still protect, but I'd expect it to cover the screen more. The attached image shows the ill fit, the shield for the rear fits great. Time will tell how they hold up.

I thought it would be a good screen protector, it really isn't. It is a basic traditional screen protector. Two screen protectors came with it: one for the back screen and another for the top analog screen. The top screen protector was not perfect-sized. Besides, the application was fairly simple: however, the screen protectors already have scratches on them. Not satisfied!

I am giving this product a 2 star rating because of the quality and ease of application. The screen protector for the LCD screen was fine, but hard to apply. Mine has a few bubbles which is annoying so I am ordering a glass screen protector from elsewhere. The protector for the top screen was awful. When you apply it you are supposed to peel away the first layer, stick it to the screen, and then peel away the second layer so that it stays in place. This protector did NOT have multiple layers, and the sticky "peel here" tab did NOT peel off. There was no way to get the tab to peel off without completely ruining the protector, so I can't even use that one now. Disappointed that I wasted my money on this.

I purchased an Expert Shield for a Nikon D750. It is a very good product. It is very clear, just as they advertise, and allows a vivid and sharp image quality while reviewing pictures. Before installing it I watched a You Tube video that demonstrated how it should be installed. I may not have attempted to install it correctly if I had not watched the video. I installed the larger back screen shield perfectly on the first attempt. The smaller top screen shield just barely covers the clear portion of that screen and consequently I had to remove it twice and retry to get it perfectly positioned. The plastic cover I purchased for my Nikon D7000 is very durable but it has a lot of abrasions (because it is plastic). The Expert Shield looks like it will have some scuffs but it doesn't appear that it will be as severe as the Nikon plastic. At least I have some protection for my D750 screen. I am happy!

I purchased this product for the Nikon D750. The package contains a microfiber cleaning cloth and two shields (a smaller one for the top LCD screen and a bigger one for the screen on the back of the camera). The size of the shields is about 1-1.5 mm smaller than the area they cover. So, the alignment doesn't have to be flushed against any of the edges, but a little off. I noticed that the smaller shield on the top has a straight edge and a slightly curved edge to match the small LCD screen shape on the top of the camera. During the installation, make sure you have the straight narrow side aligned on the side near the flash. The installation was straightforward. Peel off the Step 1 cover while holding the edges of the shield (never touch the stick part). Align with one of the edges and then apply pressure on the top to adhere to the surface. I got a couple of bubbles, but was able to remove them by using a credit card and applying pressure with the microfiber cloth. When happy, peel off the Step 2 cover. That's it! As usual with these things, make sure you do the installation in an clean area with plenty of natural light and free of dirt, dust, wind, etc. If in doubt, search for installation videos in the Web for additional details. The visibility is great and it does not feel strange to the touch. Basically, the same as if there was no shield. I highly recommend this product as an affordable way to protect your camera equipment.