LINKUP - Extreme4+ PCIe 4.0 X16 Riser Cable [RTX4090 RX6950XT x570 Z690 Tested] Twinax Shielded High-Speed Vertical Mount Gaming PCI Express Gen4 | Straight Socket (45cm) TT Compatible

Decent product, does the job and looks good too.

I needed to replace my old PCI 3.0 riser that came with my PC case as I was getting frequent errors that I suspected were related to it. Installed this riser and I was able to set my 3070 to PCI gen 4 instead of GEN 3 (PC would not boot with Gen3 selected and previous riser). since then, my issues have been resolved machine has been rock steady.

This is what you need if you have the Phanteks Evolv SHIFT Air 2 case, as that case comes supplied with a 3.0 riser cable, and they don't sell a 4.0 upgrade cable which works with the case. My board and GPU are 4.0, so when the BIOS updated I no longer had an image as the board reset the PCI slot back to 4.0 when I originally downgraded it to 3.0 to work with the supplied riser cable. This cable, although expensive, had solved that issue. Still it cost more then the case itself, if I had the choice, I would not pick that case again.

I got this to replace the stock riser cable in my SSUPD Meshlicious after upgrading my RTX 2070 to a 4070. With the old cable I had poor performance in games and the system was pretty unstable. With the new cable, it's solid as a rock. More money than I would have liked to spend on a cable, but it solved my problem. The mounting holes with the correct spacing for the Meshlicious seemed a little bit undersized for the existing mounting screws, but it installed ok in the end.

Update: I upgraded to a rog monitor and I cant run 100hz without a crash, at 90hz it works but if you connect another monitor it crashes fast ! I don't think it can really handle the bandwith... Thank you for making this cable ! Upgraded from a corsair one, but i tested several they don't work on PCIE 4.0 ! A few months back I decided to move from a I9 9900k, Aorus master, and Rtx 2080ti to AMD and I bought a Strix 570 F mb, a Ryzen 3950x a Msi 6800xt GPU and paired them all up with 32 gb 3600 corsair. 2 X M.2 Samsung pro pcie 4.0 I kept getting crashes, assumed its the CPU ( and it was a bit) as was getting errors on top of errors and a unstable system. ( the CPU had a few issues, tested on a friends system and it kept crashing, unstable at stock speed and Ram stock ! .. ) Upgraded to 5950x and system seemed better, but sometimes refused to boot (Cpu errors and white light). Bought a crosshair hero Viii (used) , 1 boot achieved after 5 resets and 2 power offs, worst after long period being off ! Assumed its a faulty MB as the errors were different. Changed to x570 Aorus master, that one flat out refused to boot, tried different ram, same thing. Changed to another Crosshair Hero Viii, this one worked much better but still hard to get it started, eventually I tried the pcie on gen 3 and worked but with a lot of whea errors. (occt test) Was at the point where I thought it must be another bad CPU, honestly weeks of stress, I have build a lot of systems in my life and I do have a bit of I.T. knowledge.. Stuck the new pcie riser cable today and so far very stable and no errors, just make sure you push it in well as I didn't the first time. The cable is well built but the red accent ruins the look, PLEASE MAKE IT BLACK ! Lets see how it works and ill update !

The Linkup cable and is easy to fit and secured well. No issues were had with Gen 3 vs Gen 4 performance.

Found the time to add my Riser Cable n im happy with the results even if my fans are close to the glass. I had to mod my Corsair 7000d case to fit the Gigabyte 4070 master in. Be great if case companies made tempered glass doors with air holes. Happy with the purchase although clearly a rip off price, taking advantage of 4.0 specs.

Bought a 15cm white pcie4 riser to replace a black lian li cable for a white build. Was disappointed to find it did not work. Tried various troubleshooting methods as described in the listing, nothing worked. Even tried another gpu, 2 different boards etc. Gone back to the black lian li for now, which works perfectly. For the price of the cable, I expected more. The lian li vertical mount with the pcie4 riser included, was cheaper! My hardware that didn’t work was as follows: Asrock x570m pro4 ( x2), Asrock x570 pro4 and ROG strix x570e. Tried both HP omen 3090 and PNY xlr8 3090. The lian li cable works on all of the above.

Der meinem Fractal Node 202 beigelegte Riser unterstützt nur PCIE 3.0. Nicht mehr ganz zeitgemäß. Um PCIE 4.0 Karten nutzen zu können, habe ich diesen eingebaut (Ultra 4 gerade, 5cm). Funktioniert seit einigen Monaten tadellos!

The sistem recognizes as pcie 4 gen & without any errors!

No problem whatsoever running gen 4 speeds after several hours of gaming with this cable.

Passt für das NZXT H1 v2 (21cm dual reverse). Wichtig, Version/Anschluss beachten. Qualität sehr gut, bei dem Preis erwarte ich dass.

Eine gute Idee um ein Problem zu lösen!