Mountain Bikes for Men, 26/27.5 Inch Sizes, Multiple Speeds, Suspension Available, Fat Tire Option, Sleek Graphics, Disc Brakes Available, Adjustable Comfort Saddle, Durable, Multiple Colors

My son loves this bike and how comfortable it is to ride. We get lots of compliments on it with the large tires!

GREAT PRODUCT

This bike overall is a great purchase, we bought two of them on sale before Christmas and we’re very pleased. However a week into our boys having the bikes and riding them the petal stripped off of the crank arms. I called Huffy and the representative was so quick and helpful. Shipped us the new parts had it in 5 days! Highly recommended HUFFY for their care and fast problem solving!

The product was rather easy to assemble. However, there were a few issues. 1. The seat was missing a bolt. I was unable to then use the seat provided. I ended up purchasing a new seat. 2. Some of the cables were attached improperly. I had to reattach the front brake line correctly. While I did buy a used bike, all the pieces should have been included. The bike itself also had a number of scratches on the sides.

The tldr of this review is, if you aren't deterred by the thought of learning how to completely tear down a bike and rebuild it, as well as buying bike specific tools that you'll eventually need(assuming you plan to do all your own maintenance), it might be worth the amount saved in the long run. I'm a prepper and this thing is also to be my get out of dodge transportation, if it gets that bad. So the full tear down and rebuild knowledge is valuable to me. If that sounds interesting to you, keep reading on the conundrums I dealt with. If not, you'd be better off to just start with a $600-700 bike. Starting my third summer with this bike. 95% of the miles I've put on this bike has been road miles. At this point, I've did about $350 in parts for repairs, not counting the cost of bike specific tools. I always replaced things with better quality. So I have about $600 in this bike, to bring it up to good quality, and break roughly even with just buying a $600 bike. One issue with this bike, is that it uses outdated standards. It has the heavy steel 25.4mm handle bars. The old quil stem setup. Classic solid axles. No mounting for disk brakes. The bottom bracket uses the older cup and cone style setup, and the bearing is not sealed. So water and moisture can get into it through the seat post and the fork mount. I had to replace mine in the middle of last year (approximately 500mi to 600mi). I also had to loctite the cups in to get them to stay tight. The crank arms fit the older and less common square taper spindles. The free wheel on the back is a rather uncommon Chinese KANGYUE brand. I was barely able to google up what tool I needed to remove it. To save everyone else the trouble, the Park Tool bbt-22 will fit. Right out of the box, I knew I wasn't riding this thing until I put a different seat on it. I noticed the kickstand on mine was rather inadequate. It needed to be longer. The bike was very unstable on even the carpet in my house, unless I had the handle bars turned a certain way. I really had to crank the handlebar screws down on the stem, to get the handle bar to keep from loosening up, but at least didn't have to loctite them. The screws for the crank arms are pretty tough, but even cranking them down with a half inch drive breaker bar, wouldn't keep them from gradually backing out, without blue loctite. This problem eventually caused my spindle holes in the crank arms to get messed up to the point that even red loctite and a breaker bar wasn't going to keep the screws from backing out. So I had to replace the crank arms. The whole double nut and keyed washer set up on the fork kept coming loose, until I used blue loctite on it. The rear derailleur is a Shimano at least. It did need adjusted out of the box, but it wasn't bad enough that it created a headache to ride it. It just wasn't as responsive as I'd like it to be. It does seem to be quite sensitive chain wear. It will start struggling on the shift, and throwing the chain as soon as you hit the .75% stretch that is recommended to replace at, or even a little before. Overall, its been the best functioning part on the bike, and is about the only thing left that hasn't been replaced or upgraded. And btw, the original chain only lasted me 3 months, vs a year and a half on the chain that replaced it. The front derailleur was a very basic looking SunRun. It didn't need adjusted initially, but after I replaced the crank arms, I could never get it to be quite right with the new gear rings that came with the crank arms, and ended up replacing it with a Shimano. While it was difficult to find the tool for that odd freewheel, in the first year and a half(approximately 900mi to 1100mi) that I used it, it wasn't showing any signs of failure, or premature wear on the teeth. It only got replaced because I had to replace the back rim after a couple spokes failed and busted free from the hub. The rim I found sounded decent, and had a good Shimano freewheel on it, that also fit the tool I bought for the Kangyue. So figured considering how everything else went on this bike so far, I might as well at least use the brand I know has a good reputation. As for that rim, I hadn't did any off road riding at that point, and it wasn't like I was ramping or jumping the street curb or anything rough. But for some reason two spokes busted, and left me limping back home about 6mph. So to sum it all up, I had to pretty much become a bike mechanic to keep this thing moving. In the end, after all the repairs, plus other upgrades not mentioned, its about on par with the quality of a $1100 bike, and a couple hundred short of spending that much. Not counting the cost of bike specific tools that I'd eventually need anyway. So if you are willing to put the work into it, and the learning experience is desirable, its maybe worth it. The Park Tool guys on youtube will quickly become your best friend too.

It was easy to assemble and it rides smoothly. Just make sure to properly inflate the tires before taking it out for a ride.

I bought this bike because of the green color. It did require assembly and it’s kinda been a pain to put together and adjust. The front wheel and the brakes were the hardest to mess with and get correct. I think the quality is great.

Not too bad for an inexpensive bike (watch out for Covid price gouging- I paid about 285) Came with a flat tire which is highly irritating and forced me to a repair shop before I’d ever ridden it. One other small issue was the handlebar stem was threaded at an angle making the cap sit askew. Minor cosmetic issue but unfixable. So far fairly happy with it. Picture shows bike with different seat, small seat bag, handlebar phone holder, and water bottle setup. Edit: dropping my rating. I’ve had two leaks, one right out of the box, and now one from street riding, location on a tube seam in the rear. Lovely. I can’t imagine actually trail riding with this bike without mods.

A la segunda pedaleada se torció la biela... Pésimo producto

Both wheels are slightly bent. The bearing that holds the sprocket is wobbly as heck! The gears sometimes don't shift properly and gets stuck. Definitely get what you pay for!