4pcs Hall-Effect Joysticks Replacement for DualSense PS5 Controller, 3D Analog Sensor Wheel Thumb Sticks Rocker Module Replacement for PlayStation 5 Controller

These Hall-effect sticks restored my DualSense responsiveness—no drift or dead zones. Installation took care and patience, but gaming now feels as good as new. Be careful how you solder this in place, you could still get some drift if you don't place the magnet in place at a 90-degree angle.

I already had a set of four joysticks that essentially, had nothing wrong but a "dead spot" in the middle that was a bit larger than I required.These using hall effect, rather than mechanical potentiometers, fit the bill precisely.Thank you!

Have two dualsense controllers with jitter on the right sticks. I had heard hall effects would correct the problem but didnt want to waste the high cost at the moment. And after having the same issue with ps4 controllers years back, I knew the level of work it would take to change these. I bought the tiny film with potentiometers first to try out. Those where a lot cheaper and it was a lot easier to just put a little solder on top of the original stick contacts. Tried those on my dead ps4 controllers and as I thought, it didnt do much. With those tiny film potentiometers you adjust on one end but the other side of the travel gets messed up. Those where more luck than a guaranteed solution. After a year finally saw this hall effect ones on a reasonable price and decided to buy them. Be advised this is a complicated replacement to do. The toughest part is removing the original ones from the controller. Controller can be opened with a quick internet video. But desoldering the old one takes A LOT of patience. If your up for the challenge it'll fix your dead ps5 controller for sure. Just take your time a dont rush. Once you get the original one off its easy putting the new one in and just taping the solder points. To calibrate them after, just go on the internet and look for a video. Its easy and again, PATIENCE is the key on removing the old one AND calibrating the new one. From a 50 dead zone setting on apex were down to a 0. Oh and I only replaced the bad one. The other joystick on the controller was fine. If it also goes bad along the way I'll just do the same.

The media could not be loaded. Exact fit for PS5 dual sense controller, joystick replacement, fix. However, the controller will notice the difference from this and the original joystick module, as the controller will not respond to the reset button as usual but will operate normally, though the reset led feedback may not respond as usual.

Se ve de calidad espero que duren.

No good don’t waste time and money these don’t work, bad parts…partes malas no funciona bien no gastes tiempo y dinero aquí puro chafa 👎👎👎👎👎👎

Product installed fine and has good signal / range of motion. However, the return to center spring force is weaker than factory sticks. I normally use the Elecgear kit, but since I didn't need the desolder plate or wick I figured I'd try a different brand and see if I can get just a good set of sticks for less. While this set is serviceable it doesn't have that crisp return to center feeling, I will keep looking for a good "value" set of sticks.

No le doy 5 estrellas porque en el momento después de configurar y calibrar las palancas u el movimiento da un poco de drift.