Nilight Headlight Assembly Compatible with 1988 1989 1990 1991 1992 1993 Chevrolet GMC C/K 1988-1993 Silverado Suburban Sierra Blazer Tahoe Yukon Chrome Housing Amber Reflector

Estos focos están muy bien le quedaron a mi camioneta

Excelente calidad

These headlights look awesome and seem to be very well sealed, but they have very poor alignment for the beams, both high and low, which is the most important part. My stock headlights will align perfectly so I know it's not an issue of bent mounts or something of that nature.I will confess the issue is challenging for this model of truck because there is only an up/down adjustment of both high&low beams simultaneously and adjustment of the entire headlight assembly for left/right for both beams. The side to side adjustment is by loosening mounting bolts and sliding them on the slots.The right headlight, adjusted all the way left has the low beam just passed dead straight to the right, which places the majority of the lowbeam in the righthand ditch. The highest for the right side hits just left of straight on (exactly where you would want it)The left headlight, adjusted all the way left has the lowbeam almost dead center of the path of travel at full distance, meaning you are dark on left side of the road and when combined with the right lowbeam makes it look like your right headlight works really well (illuminating the ditch) but the left does not. The left highball sits just off the left hand of dead straight, illuminating the lane to the left.So in effect, with both headlights adjusted all the way left as possible (forcing a terribly large fender gap on the right side and no fender gap on the left), my low beams point sharp right and the highbeams point slight left.I am attempting to contact nilight to see if they have a solution for this issue, so this review is subject to change upon their response.

The reason they’re cheap is the soft, plastic gear.Specifically, the height adjustment gears at the back of the assembly. I’d suggest using the Allen L-Key option (it accepts Allen or Phillips head, which is exceptional) because it seems stronger. Twist gently back and forth to make certain that it’s actually moving in the correct direction, and if you do strip a gear, you can still adjust it by twisting the horizontal final gear at the back. The assembly fits up and screws right in. The owner of the car that I installed these on didn’t want to spend anymore money than she had to and is thrilled with the results, as her lights are clearer and brighter than ever before. So I’d say they’re worthwhile where it counts.

The first reason safety at night being able to see things better the other thing is makes the truck look newer

So the company did replace my headlights with a new pair. I did disassemble my truck and reassemble and behold the adjuster would not adjust on that new left headlight. I’ve never even took the right one out. It is so perfect. I wish somehow I could get the love going on that left side,to be of that quality. I’m sure we can work it out. I was just gonna take some time. Thank you for your patience. very loyal customer.D.K😊

I get that these are aftermarket headlights and cost a lot less than OEM, I am a realistic person. But the fit and quality is terrible. We had a heck of a time getting these to fit and they don’t fit properly along with poor construction and quality control makes installation difficult and the final fit not so good looking. I expect wet weather will have an effect on these and gaps where it meets the fender will allow water to get behind the headlights. To much trouble to remove again and return as it took two of us who are every day mechanically inclined 4 hours to install and had a hell of a time installing. Even one side wouldn’t allow the bulb access cover to be installed without forcing it on. I don’t recommend buying these to anyone and they this is my honest advice.

Cheap product, solid customer service. Obviously you get what you pay for, they don’t fit perfect , the bulb holders need some adjustments and the dust covers don’t fit right but they are clean and look nice, especially when they’re replacing the stock yellowed and scratched headlight assemblys. The first pair fogged up the first time it rained, customer service immediately sent out a new pair after I reached out to them with pictures. The second pair had been fine until recently when the right side has started to fog up again when it rains or I wash the truck. Short story long, they’re more or less worth what you pay for. Keep your expectations low.