Low Profile Keycaps - Shine Through Keycaps 60 65 75 100 Percent, Keyboard Key caps PBT Full Size for Cherry Gateron MX Switches Mechanical Keyboard, Grey/White

The keycaps feel great to type on, the tactile feel is smooth and pleasing. The sound is a pleasing echo that tends towards bass. The lower profile makes typing much more pleasing if you're into the lower profile. The colors are nice quality, I wish there were a bit more variations but you can't knock it for that. Using them on a Keychron Q3 HE. The south facing LEDs on that keyboard aren't great. There is still light bleed between the keycaps just because of the nature of south facing LEDs but the legends do light up but you really have to push up the brightness on the backlight to get the edge keycaps to shine through. In other words, its good enough for south facing LEDs.

I've gone down this rabbit hole recently of trying to find the perfect keyboard. I ended up really liking the Royal Kludge RK84 with mechanical blue switches (I am a heavy typist, programmer/IT pro) except for one thing... the keycaps were WAY WAY too tall. Instead of sending it back, I decided I would keep the keyboard and get a set of low profile keycaps. Enter these... They came really nicely packaged in a two-layer tray that was laid out like a keyboard would be. There were keys for anything I could imagine needing (different sized Alt/CTRL/Function keys for different keyboard layouts, etc.). The finish is matte with just a little bit of texture. Overall feel is 4/5 (I prefer the soft-touch feel of my keychrons a little better). I had no problems whatsoever installing these and the fit was perfect. My keyboard has north-facing LEDs so shine-through is adequate, although some of the larger legends (Caps/shift) aren't completely uniform. Not enough of an issue to bother me. Again, 4/5. There is no legend for media keys or any of the specific shortcut functions for my keyboard (of course). While I think this makes for a really nice, clean look, you're going to have to refer to your keyboard manual for anything other than standard use. I don't tend to use media keys, and I've memorized the important shortcut functions (like connecting my keyboard to a different device) so it isn't a big deal to me. YMMV. I'm a big fan of the profile and the typing experience is superb. Even though they sit a little higher on the key switches, you can see the huge difference in height in the pictures I provided. They have a nice wide crown with narrow shoulders that make it easy to get an accurate keypress without accidental activations. I did some objective measurements using the stock keycaps, these, and my Keychron K5 and K3 keyboards (both low-profile). These consistently produce the highest WPM and accuracy scores for me. Again, YMMV. Keyboards are extremely personal, but if you are looking for a low-profile keycap, I would absolutely recommend giving these a try. I only wish they came in more colors so I could customize a little bit (even if it did cost me an extra $20).

These actually look pretty good with the Keychron K3 Max 75%. Feel good and are lit pretty well. Only thing is the spaceman doesn't fit properly and wobbles. The caps feel like decent quality and were simple to pop on.

They are a perfect fit & they give you enough variety to make sure you have all the keys! Its really easy to setup as ive never done it before, i was worried that they wouldnt fit cause maybe got the wrong format. Other than that imthey feel pretty nice & i wanted something shinethrough because i mainly type & game in the dark. I have the Nuphy Air75 v3 & the color just makes it pop more. They air a hair taller than the oem keycaps & the sound signature has changed slightly, with the original sounding more creamy even with the brown switches i have. I think the height & material has given it a more thock or clacky like a red switch. 10/10 though they look amazing!

These low-profile keycaps are a decent option if you're specifically looking for a shorter keycap set, but they do have some trade-offs. I got them because I wanted a low-profile feel on my regular mechanical keyboard, and while they do deliver on that, there are some things to keep in mind if you're considering them. First, the shine-through legends are very crisp and bright, which is great if you use RGB lighting. The black and white color scheme is also really nice—it has a clean, modern look that works well with almost any keyboard. The contrast between the black and white makes the legends super easy to read, and since they’re doubleshot, there’s no risk of the lettering wearing off over time. If you want a set that lets your RGB shine while still looking sharp, this definitely works. As for the feel, they’re fine, but nothing mind-blowing. Since they’re shorter than regular keycaps, they make typing feel a little different, even on a standard mechanical board. I was expecting a lower profile, but the change in typing feel is more noticeable than I thought. They make the overall experience feel a little snappier since your fingers don’t have to travel as far, but they also remove some of the deep keypress sensation you get with taller profiles like Cherry or OEM. If you're coming from a standard keyboard, it might take a little getting used to. One thing to note is the sound profile. Because these are thinner than standard PBT keycaps, they don’t have that deep, solid sound you might expect from thicker caps. Instead, they produce a higher-pitched, somewhat hollow clack rather than a rich, deep thock. If you’re someone who really cares about sound, this might not be the best choice unless you have a keyboard with a dampened or gasket-mounted case that can help tone it down. On a louder board, these caps will emphasize higher frequencies, which might not be ideal. Another potential downside is the fit and compatibility. They work with standard MX-style switches, but since they’re low-profile, the key height difference can feel weird if you’re mixing them with normal keycaps. Also, because they’re shorter, they don’t feel as sculpted, so there’s less of a natural flow between rows compared to a typical keycap set. If you’re someone who relies on the sculpting of each row to guide your fingers, this set might feel a little flat. They're easy to put on so that's a plus and again they seems pretty durable. Overall, these low-profile keycaps are decent if you specifically want a shorter set with shine-through legends. They look great, they let RGB lighting shine through well, and they type fine, but they won’t give you the same depth or sound as a more traditional PBT set. If you’re after a snappier, more minimal feel, they’re a good option, but if you love a rich typing sound and deeper key presses, you might want to look at a thicker low-profile PBT set or an alternative profile like XDA or Cherry for a better balance.

When I got my Keychron V5, I immediately switched out the keys as I did not enjoy the stock one. I thought I was happy with Cherry profile but when in a rush I kept making typos. I then started looking into low profile keyboards but decided to take a chance on low profile keycaps to start in case I didn't like it. Since I switched to these I've been making considerably less typos and mistypes. My jittery coffee fueled fingers have no longer trip on the keys. They sound really nice paired with Keychron's silent brown pro switches. I chose this set as they are nice shine through PBT's. They feel really good and are as pleasant to the ear as they are to the eye. My only gripe is that the shine through is barely noticeable on the black keys. They show up in pictures but in person the legends are barely legible. I love the set and am going to keep it, but am looking for a similar set with black keys with solid white legends. I reached out to the seller, who responded quickly, that they do not sell individual keys as they are manufactured as a set. I'll wait for their other variations to go on sale to swap these black keys.

As a gamer had no issue with normal keycaps in mechanical keyboard. However, for work needed something more comfortable. These keycaps has this plus more. Using old program for work I needed some keycaps that are not on 75 to 80% keyboard layouts. This had all keys I needed and as long as you are able to customise keyboard layout you can do anything with these 118 keycaps. They have very slight lights coming out through them making it perfect for night use. Not too bright but can still see them in dark room. I was able to fit all keys for my need even if some of them did not have exact size to match RK H81 keyboard.

These keycaps are of high quality that provide great feedback and nice “thuds”. They look really good on my board with subtle shine through as well. Highly recommend!

No sabía si a mí teclado le iba a quedar, pero valió totalmente la pena, quedan perfecto y no tuve que comprar otro teclado para tener las teclas así.

Teclas de excelente calidad. Dan un sonido mas "thocky" lo cual funciona de maravilla para teclados de aluminio, como el Lofree Flow 2 84 que yo tengo. El brillo de la luz a través de las teclas es muy limpio. Excelente producto a un muy buen precio.