Beaspire Cordless Rivet Gun Adapter - Electric Rivet Drill Adapter Kit 2.4mm-6.4mm, Rivet Gun Kit with 6 Interchangeable Rivet Heads and 30 Blind Rivets, Easy processing for Pop Rivets

Works so good and I use it daily that I decided to designate a drill just for it. I keep it set up for 1/4” and it does 1/8” no problem without changing the tip if you drill a little slower. The inside is built just like a regular squeeze type hand riveter. So for the negative reviews pull the tip off and make sure the jaws and spring are installed correctly. I wish I would have invented this and sold the design to Snap-on

The riveting adapter for cordless drills, comes with the use directions. The problem is...it does not explain how to set it up! Thought I had it set up correctly, pulled the trigger and the rivet leg was jambed inside the gripper jaws. It would not release the leg. The entire adapter comes apart (use caution and clean flat space to work on it if needed. Do not use the head with the same sized hole for the rivet leg... use the next larger hole. This will allow the adapter to release the leg properly after it comes off the rivet. Once it was figured out and set up right, IT WORKED PERFECTLY!! I recommend this product. I am using mine now daily.

This is not a good tool. It broke the fist time I tried a 1/4in rivet. Buy the more expensive one. Terrible quality!

Handy tool to fix rivet joints. It comes in a small plastic box with 6 different rivetheads and 30 pieces of blind rivets. Easy to use, just attach it to your drill machine and use it. I really recommend it.

I needed a rivet tool for a 1/4 rivet. Most basic hand rivet tools don't go this large. I ordered a manual one that worked for 4 rivets, but that manual one's nose wasn't long enough to work on the last two rivets and not interfere with the surrounding structure. I used this tool because it could go further and didn't have a set of handles that got in the way. I don't like the lack of feel that is part of the design, but it did work. It doesn't seem cheap, but I only used it for two rivets. It will likely sit a long time before my next use and thus I cannot tell how rugged it actually is.

took 3 or 4 practice runs to get the release down kept stocking on the largest rivets. I like this a lot at 74 this makes things much easier to work with.

I liked the concept and thought this would be faster so worth the extra cost over a hand squeeze type tool but it struggles to eject the smaller rivet rods and I spent more time messing with it and taking it apart to remove the rod so I could install the next one. It did an ok job installing the rivets at least

I like the product, good end and works properly

Easy to hold (doesn't need a handle to hold it), easy to operate, doesn't get stuck all the time like others, very small and comes with a nice case where there's enough space to replace the plastic bags by convenient plastic bottles !