ID-COOLING SE-214-XT ARGB CPU Cooler 4 Heatpipes CPU Air Cooler Addressable RGB Light Sync with Motherboard(5V 3-PIN Connector) CPU Fan for Intel/AMD, LGA 1700 Compatible

A very good value cooler; it keeps my CPU much cooler compared to my previous one. Cooling my AMD Ryzen 5 5600 to around 38°c-45°c at idle depending on the room temperature. The installation of the heatsink was simple, but fan was rather annoying to clip on using the supplied metal clips; though it worked out in the end. The fan is very quiet even at higher loads, but that is compared to my previous one which is basically a jet engine at higher loads. The Fan has RGB but since my b450 Tomahawk Max motherboard has no place to connect it, I unfortunately can't use the it and can only use the fan as a normal fan without lights; Otherwise it works perfectly. Time will tell how long the fan lasts, but any regular120mm PWM fan is probably compatible (you just clip it on with the metal clips onto the heat sink). Overall, a very good cooler that does the job well and doesn't break the bank.

It comes with a packet of thermal paste, very easy to install although I messed it up at first because I mounted the brackets upside down, looks great especially after I put the Ryzen sticker on, great airflow it flows straight through out the rear fan. And the quality for the price is mental.

Nice quality and easy to install on AMD platform. Instructions slightly difficult to follow - I ended up using the grey intel spacers instead of the red AMD ones but seems to be working OK. I didn't use the included thermal paste (prefer arctic mx) so can't comment on that but the cooling performance has been excellent and the included fan is nice and quiet. Cooler comes with additional clips to add a second fan which is good and fit easily on my itx motherboard.

Very good cooler. Keeps my computer at 20° on desktop with my 75700g. Would recomend

my fan on my two pipe low profile 65w cooler was going too fast making too much noise specially in this heatwave so I wanted to upgrade to something a little bigger. I was skeptical before buying due to really having no idea how much this would help based on reviews but it worked out and this review I am writing is the one I wanted! took a R5 5600 moderate idling few apps open from around 50 - 65C down to around 35C, on a fresh boot its even under 30C for a short while moderate gaming went from around 85C to around 45C plastics of the fan feel a little cheap but the blades feel good and it isn't making a sound! overall quality feels really good, have not tried any super intensive loads for long duration's but given the performance I am seeing so far I am very happy and confident temps will hold. update : one issue I will note is the RBG of the fan is a bit wonky, from UEFI it would only set the fan to green no matter what combination of rbg I set, unless I set random, from an app in the OS seems like sending green was making the fan red and setting it red was making it green but at least the app would let me set whatever colors I wanted like solid white, ended up setting it to rainbow Highly recommended cooler for a R5 5600 and the price point is great

I got this to use with an i5 14400F instead of the stock heatsink, it does the job nicely. Easy to fit once you see how (youtube vids better then the tiny writing on the pamphlet). Keeps temps low and isn’t that loud. Looks quite stealthy in the case. As the fan mounts onto the side of the heatsink, it does foul against the first memory bank on a Gigabyte DDR5 B760M board, so consider that if you want to use all slots.

Great fan for the price. Intel stock cooler was giving me 90c in a game and this was at highest in the 50c

Usually not a fan of RGB, but the lights are fine and look good inside of my case. It also acts as a bit of reassurance that it turns on when I boot up my PC. I bought this fan because it was cheaper and will just work with my CPU, MoBo configuration. Installation was easy, just follow the instructions on the manual. The screws did initially give me a bit of trouble. This was my first time building a PC so I was nervous if I was doing something wrong, but what you need to do is apply more pressure down on the screws to make sure that they go into the holes on both sides (make sure that you so them evenly) as they are spring-loaded. Temps on my CPU I have no complaints. My Ryzen 7 5700x stays very cool on idle and doesn't get hot when gaming. Noise levels is hardly noticeable, even when sitting right next to it. Only real complaint I'll give with the installation is how fiddly it is installing the fan onto the heatsink. Idk how it is with other coolers of a similar form factor, but it something that I found stressful as a first time builder.

reçu avec du retard, mais le plus gros problème c'est les ailettes en aluminium qui étaient tordues alors que le produit est neuf ! j'ai renvoyé l'article, mais la encore c'est uniquement par dhl donc pour le retour c'est plus compliqué car pas moyen de le laisser à la poste.

Sehr guter Kühler für wenig Geld. Absolut empfehlenswert !

The model that I bought was not quite enough performance for my needs but that is on me for the decision. I should have picked up a more robust model for my Ryzen 7700X. That siad, I was impressed with the build quality, ease of install, and performance. Well exceeding my expectations for the price point. It's a lot like a n updated hyper evo 212.

For its price, it’s actually decent and capable. Even when pushing a Ryzen 9 5900X hard, it managed to keep the temperature bellow 75°C