ScotchBlue Original Multi-Surface Painters Tape, 3 Inch Wide (2.83 In. x 60 Yds) 1 Roll, Blue Paint Tape Protects Surfaces and Removes Easily, Masking Tape for Indoor and Outdoor Use (2090-72NC)

I have used scotch painters, tape in all size sizes for a variety of projects, and it never lets me down. Works great for a crisp paint line, taping up some signs on the wall that you want to take down without marring the surface, and placing objects temporarily on glass. Can’t go wrong with this brand.

It’s painters tape

I use it everywhere for almost everything. Example 1. An acoustic ceiling tile collapsed due to a leaking pipe. I replaced the tile with plastic and adhered it to the grid and as well as some surrounding tiles. A few days later after the pipe was replaced, I carefully removed the tape with little to no ‘esthetic’ damage to the tiles. Example 2. I use it to keep non adhesive backed shelving paper in place.

Great product! Works great! Highly recommend!

I use this "blue tape" all the time for all sorts of projects. Most recently, I used this tape on a set of "cat steps" I milled from 12/4 white pine, topped with low pile carpet, installed as "floating shelves" on the wall and painted black - on a white wall. I taped the wall off, used Sherwin Williams satin black stock paint and painted 6 steps for my furry buddies to climb on on my front room. I let the black paint dry, pulled it off and the paint job was perfect and walls were all still white. I didn't remove the wall paint underneath the tape, I didn't get any black paint on the wall and the tape went on and came off with ease. I've tried generic versions of this tape and they pretty much fail one way or another so I stick with the Scotch brand (pun intended). Hope that helps!

This tape is wide, nice for baseboards etc. Only complaint is that it rips when removing. We used Behr paint, and removed tape a few hours after painting. Tape does leave clean line, just very thin.

Great for everyday use non-tac, has held strong for multiple years without needing reapplication.

Item arrived on time and in good condition

Pensé que requeriria mas producto y compre 2, ahora veo que cada cama de cinta dura hasta 10 impresiones antes de desgastarse, se utilizan 3 tiras de 22 cm para cubrir una cama de 22 x 22, cada cinta dura 80 camas aprox.

Llegó en tiempo y forma, todo correctamente.

This is the right tape if you use tape on your 3D printer hot bed. It's nice and wide, so you don't have to lay down as many strips. Prints adhere better to this than to no-name blue masking tape...no idea why. A roll lasts a long time, so the cost per print is quite low, compared to a single-sheet product With a single sheet, if you gouge it, you need to replace the whole thing. If I gouge this masking tape, especially when it's still fairly new, I just change out the damaged strip. Also, I rarely change out the strips at the edge of my table (330 x 330 mm), as I rarely print things that large. So, again, the tape is better value for a second reason. It's hard to find locally, especially in this width, as all our local hardware stores seem to have gone out of Scotch products for some other brand I never heard of. Glad to be able to get this on Amazon!

Notice how all my builds have painters tape? That's because BLUE painters tape is pourse. Filament sticks to it like crazy! It's all I use. I mean I have a mega pro, the filament sticks just fine to the bed but to the tape. BETTER! Slight rub with a green scratch pad. Omg, the finest detail sticks. Trust me. It's all I use now. Buy the wide stuff. 2.8 inches or whatever. Make sure it's this brand, don't go cheap.

I like this wider tape for the bed of my 3d printer. Easier to cover bed with less seem line ups to worry about. You need to know your prices, as this item seems to fluctuate between low tens and low twenties.