M&P USAActive Electronic Magneride delete kit. Compatible With Buick, GMC, Cadillac, Chevrolet, Ford. 1997-2012 (READ Description)

Super easy installation and my service suspension message disappeared as soon as I clipped these bad boys in on my Cadillac DTS. Support from seller was amazing. I had a few questions after installation and I reached out to the seller via Facebook and they replied and answered all my questions in great detail.

I had to replace the rear shocks with aftermarket rear shocks that didn’t have plugs so I had a service suspension system and my speed was limited as well, this is an 08 Buick Lucerne CXS. I plugged a set of these straight into the plugs where they used to be plugged into the rear shocks and it eliminated the service suspension message and the speed limiter!!

Cleared "Service Suspension" message and 80 MPH speed restriction.I replaced my front Magneride Suspension and rear air suspension with passive struts, requiring a bypass of the sensors.I ordered two sets of these and one set of the universal pigtail adapters. (Mentioned in the sellers product description).The rear suspension sensors are "plug and play" and no crimping or cutting is required.The front suspension sensors on my vehicle required me ordering the pigtails, as the front sensor is not a direct fit. Easy enough. I spliced the adapters in with no issue.I reached out to the seller with a couple of questions before ordering a second set of these sensors and spoke with Adam. This was one of the best customer service experiences I have ever had with any Amazon seller. If you order this product and have any questions about installation or fitment, these folks go out of their way to help resolve any problems.

These are exact fit for front struts on 05 corvette. However to work with the rears you have to cut the piece of plastic from the middle of the inside of the plug. Very easy to do and work flawlessly after. EVERY OTHER COMPANY WANTS 3-400 DOLLARS. Be smart buy these

The ad headline reads, as advertised, fits gm 1997-2012. These units are NOT! for 97-12. They are for 2013-2019. My first realization they were wrong was the connectors not compatible with the harness. I pulled up the ad to check fitment. I noticed at the bottom of product description I saw a "read more" link. Scrolling down and I see the printed application "2012-2019". Further research on line I discovered the 97-12 bypass units are 5". These are 5 1/2" with a different style connector. Even the zip bag they were in was labeled 1997-20012.

This is a edited review. After placing a negative review, m&p usa contacted me. They were extremely nice. My previous communication through amazon did not get to them. They explained the reason the shock simulators did not last was due to need for a second bypass module for the ride height sensors. They assured me that this would make the shock simulators last. They rushed me the four modules i needed for my wife's 2005 cadillac srx front magnetic shock delete. Put the parts on. Now back in buisness😀. Connectors fit perfect/ easy to install. Great customer service! Thanks M&P