ROCKETSOCKET | 8 Pieces 1/4" Drive Bolt Lug Nut Extractor Socket Tool Set | RAZORGRIP Technology Extract Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws | Made in USA Steel

Bought an old truck for summer project not well maintained (read project) corrosion and some already rounded bolt and nut heads.Bought a cheaper set worked on some but wouldn't fit right on a few..On the advice of a friend got the Rocket Socket and even though labelled the same sizes it fit way better for some reason.Got job done and now convinced they are better than the cheap knockoffs.I have other tricks to remove rounded bolts but recessed bolt heads were preventing me from using those tricks.This tool made short work of a big problem.

I have now used this set twice for extremely stuck bolts. The first bolt I had soaked in penetrating oil for 24 hours and even used a torch to heat up the bolt and nothing seemed to work. I went to autozone and bought a set of socket bolt extractors and it immediately stripped the socket. I then gave up for a few days while I waited for this set to come in. Within 5 minutes of receiving this set I had that darn bolt out. A few days later I had a rusted bolt that was mounted on my turbo pedestal. It took an incredible amount of force but this extractor worked and I used the same 10mm socket, even after using it a second time I could tell it would work again. The sockets are made of a very nice hardened metal that will definitely last. The fluting is machined so that they only work for extraction, so don’t expect this to be an all around set to use. That same fluting really holds tight when extracting. These are amazing and worth every penny, they excel at relieving frustration. I am going to buy every size they offer now.

Helped remove stripped Torx security screws from airbag bracket.Very happy with result!

This saved my life when i was doing a oil pan replacement on a 6.4 powerstroke. They bit so hard and isnt that what you want from these ?

About 20 years ago I built a bridge to an island on my pond. It is now time to replace the floorboards and to do so I needed to remove the PVC railing I put up then. There are 20 posts with 8 Robertson (square socket) stainless steel screws to hold the brackets that the railings are attached to. While trying to remove the screws the soft stainless steel screws began to strip making removing them impossible without actually grinding the heads off to release the brackets. Over 25% of the screws stripped when trying to remove them. After doing an internet search as to what would be the best screw extractor for this job I came across the Rocketsocket extractors. I received them today and what a difference!!!!! The sockets covered the screw heads and zipped them out like nothing. They did such a great job I did not even bother to use the square head screwdriver to take the rest of the undamaged screws out. I used the Rocketsocket on all of the remaining screws and turned a many hour job into less than an hour. I could have not done the job without this extractor set. They are a little expensive and I would have liked them packaged in a little better case but overall I am tremendously satisfied with them.