Rough Country 4x156mm to 4x136/137mm Wheel Adapters for Polaris UTV's -10097

I am using this on a 2022 Polaris Sportsman 570 EPS. The adapter does come with a M10 Lug Nuts, but it is not the 3/8 - 24 I needed for the factory Lugs. Just be aware of this as the EPS model only comes with flange nuts for the steel wheel so you will need a set of 16 tapered 3/8 -24 lug nuts.Beside that issue the adapter itself is very nice and well machined.

These HUB Bores are too small for 2011 Polaris RZR 800. I have the Robby Gordon edition but other then the lugs being 3/8x24The hubs are the same. Rather then return as no other options out ther I had to modify and grind the Polaris hub tabs down flat to make these work flush . Took 2 hrs with a angle grinder.

Great buy. Have canam sand paddles. Bought these to put on a 2021 rzr xp turbo. Worked great. They fit perfectly.

I ordered these to be able to put a set of Can am wheels on my Polaris Ranger. They come with a set of Polaris lug nuts to install the spacers which are correct and a set of Can Am lug nuts to mount the wheels which are not correct. The new studs for the wheels are also Polaris and are a little bit bigger and coarse thread unlike the Can Am which are a fine thread. You have to drill out the wheels just a tiny bit to get them to work. the pattern is correct but the new lug studs are bigger than the Can Am hole. I was able to use the old lug nuts off of my Ranger to install the new Can Am wheels and they worked fine.

Worked just like they said. These are a 1” spacer as to adapt to wheel pattern. Looks good and does what I need. These went from Polaris xp 4 turbo which is 4x 156 to a can am x3 wheel I already had which is 4 x 137. Shipping took about two weeks but product is good. Fed ex always seems to have an excuse for late delivery.

The lug posts and lug nuts are soft, they dont thread well and easily strip out if torqued too much.

Did not fit correctly

Product is fine