Cool Hand Customized Grips Screws for Beretta 92FS, M9, 92S, 92X, 92 Compact, 92A1, 96A1, 92 INOX, 4 Stainless Steel Screws, 4 O Rings, T10 Torx Key, Black/Silver/Gold/Rainbow Colors

Good looking screws! I have them on my Beretta 84bb with wooden grips and it's a really nice contrast. Finish and color look good, the included star wrench fits the screws tight so you shouldn't have to worry about stripping or marring anything. I actually had 5 in my package so I'm happy to have a spare if I ever need it!

These screws need to be used with washers or o rings. Otherwise they will protrude too far into the grip and block the magazine from being inserted. Really need to use a toque driver to NOT strip the receiver screw holes (maybe 15 inch pounds or less). Like the use of star drive for fasteners of this type. Nice looking heads. For Beretta 92 pistols.

I sent these back and do NOT match the sizes stated to fit the gun handle

good product. and they ship plenty of the rubber o rings. I bought a pair of gridlock thin panel which fits my hands better. The factory screw caps are too thick so they stick out. these screws have thinner and dome shaped cap, which fits the thin grip panel so much better and look better. However the stem is 0.2" long while the factory screw is about 0.18". when fully tightened, they stick out inside the mag well and pinch the mag. the material is soft enough that I can use a hand file to shorten them but still only if they can make it 0.01" shorter then it would save me the tedious work of filing the screws and I d score these 5 out of 5.

Looks cool

Great quality what the add dosnt tell you is they give you a extra screw and rubber washers and a torx tool, we'll worth the money.

First off, these screws are NOT the same length as the factory grip screws on a Beretta 92XI. Regardless, these screws are absolute, utter garbage. The heads break clean off. And this was going slowly in brand new factory bushings using a high quality bit and torque screwdriver. Might as well have been snapping a potato chip in half. First one snapped at 5.6 lb/in. Second one snapped off at 5.2 lb/in. Save yourself the massive headache, frustration, and potential frame damage from trying to remove one of these broken screws. I work on a lot of guns, and I can confidently say that these are by far some the worst quality screws I have encountered yet. Don't even try them, absolutely not worth it.

Reading the reviews, I bought them knowing that I would probably have to do a little bit of manual labor. As expected, screwing them in at stock length results in it being impossible to insert your magazine into a Beretta 80X, but after a bit of either cutting or grinding with a Dremel to shorten the screws, they're perfect to add a pop of color to the arm. If you aren't willing to do the work to shorten the screws then avoid this for the 80X or similar options with the thinner grips that you can find in other reviews. Otherwise, this is a low cost option for a simple bit of personalization for your Beretta.