Case Fan Hub - 10-fold PWM Fan Distributor with SATA Power - Black

Nice little device that hooks up to a SATA 12V connector. You then plug the supplied lead into one of your PWM fan headers & that controls the device. You can the plug multiple fans into it & they all work in unison, being sent the same signal to all fans attached to the device. Inexpensive and works as described. It's small and comes with adhesive pads that you can use to position it somewhere convenient inside your case. I would suggest you consider getting some extension leads for some of the additional fans you plan to install. Technically not required but it makes running cables between the fan hub & fans easier.

OPINION: Highly Recommend! I'm very happy with the ARCTIC Fan Hub so far. It was a quick installation, functions extremely well and offers many inputs for your ARCTIC case fans. Read below for some in-depth information. SIZE: The ARCTIC Fan Hub is honestly so much smaller than I thought it would be. Based on images you may think it's rather large. However, upon arriving it was so small I was confused by the packaging. It's easily comparable to that of a credit card or SSD in terms of size. WIRING: It will come with a wire which has a 2-pin connector and a 4-pin connector. You plug the 2-pin connector into the ARCTIC Fan Hub and the 4-pin connector into your SYS_FAN1, SYS_FAN2, or CPU_FAN1. Whichever one is most suitable for your needs and setup. On the other end, you will require a SATA cable from your PSU to directly power the hub. You do not need to make use of the SATA inputs on your motherboard. You only need to insert the abforementioned 4-pin connector into an applicable input. EXTRA CONTENTS: The ARCTIC Fan Hub comes with a pack of four adhesive/magnetic strips that can be used to secure it's position within your PC case. While I personally have no issue with how it is, they could certainly help. If you would like some advice, it's so small I simply have it sitting on top of my PSU shroud at the bottom of my case. If this isn't sufficient, you can always use the adhesive/magnetic strips for an ideal position.

One of the easiest and best things I've bought for my PC. Simple to install and hook up, cheap and effective. Fits in the back of my NZXT H440 like a dream with the included magnetic strips.

Good compact hub and still working fine after almost 3 months. The only thing i can fault is that the fan headers goes in more than i would like as it can be a pain to take them out. Comes with sticky strips or magnetic strips for attachment

The ARCTIC Case Fan Hub is really handy. It helped me sync all my fans together neatly, and it was super affordable for what it does. Setup was simple, and using SATA power means it doesn’t put extra strain on the motherboard. For anyone looking to organize multiple case fans without spending a fortune, this is a solid choice.

Handles 10 fans perfectly well into one fan point and a sata power lead up and running in no time really worth the price as always with Arctic

Solid hub, have only had it for a short period of time but it's functioning as it needs to, however the SATA had quite a bit of trouble plugging in properly, but eventually I got it to work.

Great product does exactly what its supposed to.

Eine der besten Anschaffungen, die ich beim Zusammenbau meines PCs getätigt habe. Dank Klebestreifen / Magnetstreifen easy so anzubringen, dass alle Kabel einfach verbunden werden können. Steuere meine Lüfter mit Fan Control und habe somit die völlige Kontrolle über alle 6 Lüfter, die ich mit dem Hub verbunden habe. Keine Ausfälle, keine Störungen, super Preis- / Leistungsverhältnis und eine volle Empfehlung! Weiter so, Arctic!

Se compró para simplificar la colocación de los ventiladores y cumple su propósito sin problemas ni complicaciones.

Had an older mother board with only one fan connection. This solved the problem so I can run all my fans.

In gebruik bij een zelfbouw SpeedComfort alternatief, in combinatie met 10 Tacens Anima AF8X2 ventilatoren. Werkt probreemloos.

Ho inserito questo hub nella mia postazione per gestire più ventole su un solo header madre: il case in policarbonato è compattissimo ma solido, e il design corto e piatto lo rende facile da nascondere senza occupare spazio,ottimo per il cable management. Il sistema è semplice quanto efficace: si collega il cavo PWM all’header della scheda madre, mentre l’alimentazione alle ventole arriva tramite il cavo SATA, evitando cadute di tensione. Tutte le ventole rispondono al segnale PWM sincronizzato con la prima porta, mantenendo velocità uniformi . Ho aggiunto fino a 8 ventole Noctua da 120 mm e tutto funziona perfettamente, senza rumori strani o ritardi, la scheda madre le controlla tutte come se fossero una sola, senza stress di tensione. L’installazione è davvero plug‑and‑play: basta collegare e funziona, con nulla da configurare nel BIOS o software. Non gestisce il controllo RGB: serve un hub separato per i led, ricordatevelo! Occhio quando acquistate le ventole, anche l'hub ha il suo carico massimo come pure la porta sata, non pensate di collegare 10 ventole da 4000 rpm, così a cuor leggero, fate i calcoli di amperaggio!