Soap Dispenser for Kitchen Sink, Built in Sink Soap Dispenser (Brushed Nickel), Countertop Soap Dispenser Pump with 47" Extension Tube kit, No Need to Fill Little Bottle Again (Longer Thread Shaft)

Better than I expected. Nice quality finish, very easy to install, perfect fit, it pumps smoothly and efficiently, the tube extends to a large commercial brand bottle of liquid soap. reasonable price. It works great!

It's a brilliant idea to connect the dispenser directly to the soap bottle. The dispenser is not the highest quality, but it is adequate and works great. It's easy enough to install.

I hated how often I had to refill my old dispenser. This makes it very easy once it’s set up. I just buy the biggest dish detergent bottle I can find and it works great.

I was pleasantly surprised by this product. It looks good and works well. It took a while to pump the soap up the tube, but once it was done, it dispenses soap effectively. So far, it has been easy to clean. It is quite lightweight, but that is to be expected since it is mostly plastic.

Super easy to set up, and WAY easier (and cleaner) to keep full than a top-fill soap dispenser. Looks nice and seems to be good quality. NOTE: I thought it was defective until I re-read the installation instructions which specify that you need to (slowly) pump the dispenser 30+ times before soap will come out. Makes sense as the tube that goes from your soap bottle up to the sink is several feet long. So before you give up, pump more than you think you'd need to. After it was primed correctly, we've had no issues.

This device really sounded good, but operationally, it is greatly lacking and difficult to use. The problem is that the tapered cork that has to fit into the many different sizes of soap bottles, so they give you several to choose from, but at best, it is still problematic. When you are setting it up for the first time and each time you need to replace the bottle of soap, the bottle itself must be cleaned to insure that there is no soap on the inside neck of the bottle or the tapered cork will pop right back out. When you insert the tube into the bottle, if the tube from your prior soap bottle touches the inside neck of the bottle and gets any liquid soap on the bottle, you will have trouble keeping the cork in. Most likely the bottle has a residue of soap on the neck of the bottle from the bottle being tipped over in your shopping cart or grocery bag on the way home, and unless you clean it off so that it is not slippery with soap, the cork will not stay in, it will pop right back out. Save yourself frustrations and don't buy this lousy device as the concept sounds good but you will regret the effort that you will have to expend every time the bottle has to be changed. If you get the cork to stay inserted in the bottle of soap, you will then have to pump the dispenser some 60+ times to get the soap to refill the tubing, and you will wonder if it is even working because it take so many pumps with seemingly nothing happening. If you finally reach this stage, it will work well until the bottle is empty and you have to start the whole process all over again. What I finally dis was to take a long twisty tie wire (very long, or perhaps two or three tied together to make it long enough) like at times come on a bread bag and tightly secure it around the neck of the bottle in the threaded area so that it can't gravitate upward and take the remaining length and angle it up to the top of the cork and tightly wrap it around the cork and twist the ends together to secure it. This should hold the cork in place. After replacing the soap bottle many times I finally tried this method of holding the cork in the bottle. It probably would work to keep the cork in place even without cleaning the inside of the bottle neck from the soap that lubricates the internal edge of the bottle neck. I should have tried this the second time I switched soap bottles!

I will start off with this set-up works perfectly as is. I don't know if they intended the stopper on the bottom end of the tube to fit and secure itself to the main soap container, it just sits loosely on the opening for me. The soap sort of doesn't let it seal, just keeps slipping out. Regardless of that detail, it works great as intended. It did take a really long time and a lot of pumping to initially pull the soap up the line and have it ready to go, and I can't really get it spit out a ton on each shot, but that's fine. For the amount of soap it spits out, I can still get my dishes done, but this saved me the hassle of crawling under the sink for the little soap reservoir tank the faucet set provided me. Love it!

🌟 Simple, Elegant, and a Must-Have Kitchen Upgrade! I absolutely love this soap dispenser—it's the perfect addition to our kitchen sink package. 👍 Functionality & Efficiency The design is incredibly simple and easy to install, making it a quick and rewarding upgrade. The real benefit, however, is how it helps us optimize our soap usage. Instead of having access to the whole bottle, the dispenser provides a decent, pre-measured amount of dish soap with each pump, effectively reducing waste. ✨ Aesthetics Aesthetically, it's beautiful! It has a sleek, clean look that perfectly matches our existing faucet and elevates the entire sink area. This dispenser is a winner for both its practical functionality and its stylish appearance. Highly recommend!

Great product - love it.

Fantastique. S'installe en 5 minutes. Fonctionne merveilleusement bien. La pression sur la pompe est ferme, sans être trop dure. Avec une bouteille de 4 litres de savon, la recharge est espacées. Très content de mon achat.

No soap tank was delivered, in general; Very good materials and easy to install. Highly recommend.

Amazing stainless quality

Me encantó el diseño y su practicidad