Hyundai 52cc Long Reach 5-in-1 Petrol Garden Multi Tool with 430mm Grass Trimmer, 425mm Hedge Trimmer, 10" Chainsaw, Brushcutter with 3 Year Warranty, Blue

Terrific tool. Easy to assemble. Is heavy, so does need the included harness which makes this very easy to use. Strimmer is well balanced though guard is large so taking me a while to get used to best way to use vertically edging paths & borders. Hedge trimmer terrific. Blade could do with being a bit longer but reach with the additional pole is very good. Yet to use pruning saw but looks good. Impressive quality machine, gives good finish to lawn & hedge.

The video shows it starting on first pull but it was obviously warmed up first, as it can take 6-8 pulls or more to get it started. Hedge trimmer is rubbish and the strimmer can be hard to use too but the pole saw was ok. Had a few issues with the fuel system pipes etc and also the petrol cap split, bolts dropped off etc! Don't really like to be honest because it has been poorly assembled and they've also used cheap components on it.

Very good am happy only problem the chainsaw slow you down because it always comes off after a few attacks on conifer's and have to put back on but I find all chains saws are a nuisance so still giving four stars

Before I purchased one I red many bad reviews but still I decided to give it a try because £220 it’s very cheap for a 52cc multi tool with all these attachments.I must say in my experience it is a fantastic kit and the engine starts with the first pull just pump the fuel couple times when cold started. The strimming line that comes with it is not very durable but that’s not a big problem as you can buy a good one for under £10. Loads amount of power never needed to use it in full throttle so far.

This is fantastic so heavy tho but it does come with a harness which helps loads the only fault i had was the person who wrapped the strimmer wire in the spool done it wrong so it now doesnt come out one of the holes so instead of being a dual strim its now single wire strim

For what it is this product seems like REALLY good value. A higher range alternative is considerably more expensive and so I wasn't expecting perfection. However Hyundai's name is reassuring and, on balance, I expected better.My experience is that three out of four bolts holding the pull cord starter to the machine loosed and fell off off after several hours active use (Some hedge cutting but mostly strimming). These things happen, and for next time I'll be sure check all the bolts for tightness before using the machine.The bolts were lost somewhere in a field, but it was a reasonably easy problem to fix. And so, rather than sending the machine back for repair, I asked Hyundai for replacement bolts and suggested that I repair the machine myself. (I calculated that this would be quicker and less troublesome for all parties).But this decision was FOLLY.HUGE FOLLY because Hyundai's service department (GenPower) sent me the wrong bolts! Not once but again, and again, and again! Only on the fourth occasion did they get it right (Thank you).And so, for weeks my machine was unusable. Yes, the people that I corresponded with were communicative and seemed more than willing to help but, to get it wrong so many times, is ridiculous! There was NO excuse for this. I had very carefully gone through the required protocols. I had given the correct details, invoice number, model name - I had even sent detailed photographs of the problem.At one point I had the impression that I was dealing with a third world country (I have lived and worked in several) - although the willingness to fix the problem was there, there was a basic lack of understanding and instead, creative sidestepping - e.g. they sent me the correct bolts without the flat washers and spring washers (the factory specification) and I was told: "our parts team that the bolts have been tried out without these washers in the workshop and it works fine. Thus, if you install it without the washers, it will work as it should."Seriously?I pointed out that actively working with a machine in a field was very different to running a machine on a bench in a workshop. And that the machine was built with these washers for a reason. And, that, had I sent it to them for repair, and it had arrived back without the factory specified washers then I'd have sent it back. Fortunately they resolved to attend to this.Next, they sent me bolts that were way to big and with some washers but not all.To their credit - on the fourth attempt they managed to send the all the correct parts. Thank you.Genpower must have wasted a fortune in postage. But, they only cost me was my time and frustration. Frankly I'd preferred to have payed postage than experiencing the inconvenience.But, this was not the end. Within an hour of getting the machine restarted and in use the the fuel filter fell off inside the tank! And then, after that, the fuel tank started leaking because a fuel line slipped off!!The machine no longer starts although I have reattached the fuel line. It's been this way for weeks.For now I do not have the willpower to do battle with Hyundai's service department again. So they don't even know about the new issues. I do not have the time to waste. And so now this machine sits unused.I will do something about this sometime in the future. I have almost all of the three year warranty left. So I have plenty of time before that expires.Would I recommend this machine to others. Or, for that matter ANY Hyundai product sold in the UK.ABSOLUTELY NOT!