oxystore – oronasale Bearing for DreamWear Full Face – Philips Respironics – MW (Medium Wide)

Description

This product is the replacement oronasal pad for the Philips Respironics DreamWear Full Face mask. This is a replacement part for the bearing already present with the mask. The pad is available in four sizes: small, medium, medium wide and large. Please choose the desired size when ordering. This pad is compatible with DreamWear Full Face Mask and only with this and no other mask. This product includes: X1 Cushion in selected size. How do I find the size? The bearing size is printed on the front of the bearing itself in black letters next to the arrow indicating the direction to connect the bearing to the frame. System One Resistance Control When using a CPAP Respironics System One, Respironics' One Resistance control number can be set to allow the machine to compensate for different types of mask. The resistance control number for DreamWear Nasal Mask is X1. Note: System One Resistance Control is only applicable for SystemOne machines. Assembly and disassembly To connect the bearing, align the arrow on the front with the arrow on the frame and press the two parts together until you hear a click, then repeat for the opposite side. Check the arrow on the bearing matches the arrow on the frame, the bearing will not work properly unless properly attached to the frame. The pad can be removed by pulling the ends off the frame. Nasal DreamWear and Oronasal DreamWear If your therapy requires switching from a nasal mask to an oronasal mask, or vice versa, you can "transform" DreamWear Full Face into DreamWear "under the nose" and/or DreamWear Gel Pillows. To do this, you need to remove the oronasal pad and the oronasal headgear and replace them with