PioneerTS-T15 3/4" 120 W Max Power, Polyester Fiber Soft Dome - Tweeter (pair)

I haven't installed them yet so I can't comment on sound qty, but, just from looking at them, worth noting,You see that ring around the tweeter? If you think you can separate that from the actual tweeter, and there-by fit it into a smaller cutout, be advised, it is glued in. and not in such a way as you might "exacto-knife" it out. IF it's going under the grill, so you don't care what it looks like, and you need it to be SMALLER probably your only route will be to put the outer ring to a grinder or dremel-tool-it.The listed 1-1/2" diameter includes that ring. Without it it's roughly, .8 to1.1" MY CUT-OUT is supposed to be 1-1/2" so I'm just saying, because the listing doesn't make it clear if that ring comes off. It doesn't.I gave it 5S based on packing, speed of service, and I got a good price, and on faith. MEANING I'LL BE BACK if it turns out that faith was not deserved.

I’d say this is more on Amazon then the company or the product but it didn’t fit my 1997 k1500 as it stated within the door. That being said I did wire them in before noticing they wouldn’t actually fit and the sound from these speakers really added to to the fullness. I requested the item to be returned, at which the company graciously offered me 50% to simply keep the product, for that price I can MAKE them fit.

These are quality tweeters and fit right into the original stock position on my Lexus. Slight modifications with the original bracket of the original tweeter and BOOM! Sounds great and it's tucked away clean, out of sight! Pioneer quality, enough said!

This is not just a plug and play setup. You'll need heat shrink connectors, heat shrink sleeving, potentially a wiring diagram, electrical tape, likely a dremel for fabrication, soldering gun, heat gun, knowledge on polarity and working understanding of capacitors and how to solder. I had no idea what I was getting myself into. 3 stars for sound quality but this was not easy and I'm an ex aircraft mechanic. End product was pretty good for the cost.

Not sure these are worth 45 dollars but they fit in the 2004 chevy silverado a pillar tweeter hole perfect with bose system 👌

CRAP . How did these tweeters get a good review? I am a customer car specialist and have been scratching my head for weeks as to a legit way to mount these things.They make no sense whatsoever. What should be a stud, a nut and a flat bar is instead a couple dozen puzzle pieces that have no purpose but to drive normal people like me insane. This company has been in business how long and still finds it acceptable to build crap like this?I would NEVER mount something like this in a customers car.The Top mount concept has no purpose when you still have to cut a huge hole. The whole reason for a top mount tweeter is a single hole that can be capped in the future. You have to cut 3 holes over a 1" spread for these stupid tweeters.What locks these things in place is the friction between the poorly soldered randomly aneled wires and some twist lock function that is ridiculous and doesnt fit due to the chinese people building this junk haveing no concept of the engineers already senseless design.When you try to mount flush, the design makes not little sense, but NO sense. The 'twist lock' mechanism is now free to spin, and instead of sitting flush in it base, or having a swivel socket, it instead has to ride on top of 2 aluminum wings attatched to the 3 pieces of bracket required to hold the flush cup.The cutouts for the wires match the aluminum wings so you cant mount these with the Up side up, even though it is specifically labeled UP and the tweeter grill is branded, directionally of course.I've been doing this stuff for 10 years and it is disgustingly obvious that things are being made more and more retarded every year. I cannt accept hot gluing and double taping tweeters into a $60,000 piece of equipment just because the customer want his speaker grills to have the same name as his ipod hub.

I replaced these in a 2000 Lexus RX300. I actually had to take it to the audio shop because they had to get soldered in, but they work perfectly. the tweeters in this car are on the dash board and stick in a plastic molding is the reason for the soldering. If you have read any of the other post I have posted, you will see that I have put a lot of stuff in this car from amazon (amp, tweeters, antenna, floor mats) and it was way less expensive than what the dealer would have charged

When I ordered them, they were the wrong speaker for what I needed. I obviously don't know a tweeter from a 2 inch dash speaker. I also ordered connectors which were the wrong ones. But I'm not one to return something.After cutting up the old speaker, placing the tweeter inside so id be able to mount it down and hard wiring them in, they turned out to be amazing tweeters. They are louder and more clear than the stock 6x9s I'll be replacing shortly. Amazing tweeters id buy them again and again.