ionzKZ10 PC Gaming Case Mid Tower ATX Tempered Glass With 4 x 120mm ARGB Fans - Black

Simple, cheap and effective, relatively compact but fits my full ATX board no problems. Tempered glass and build quality at this price point stands to show how far we have come in value over the years meaning you dont have to spend £100+ for a good case anymore.Would prefer solid white lights as opposed to rainbow but who am I kidding at this price it has everything!

Very good for the price, has all the features anyone would need in a build. Also the fitted front fans are good for the money. Hard to fault an it looks good.

This little case is PLUCKY!It has everything you need, short of 10 drive bays and a coffee maker.I bought this as a place for my recently displaced motherboard, CPU, and RAM, and boy does it look gorgeous.Yes, this is a budget case.No, It is not built as well as a Fractal Design or COrsair case of 200-300£.Yes, it is light and the metal is thin but that is a plus point if you like to move your PC around (my Fractal case weighs near 20kgs)I fell in love with this little case, primarily with how well it is laid out inside.The USB 3 connector to the front panel is well hidden as it connects at 90 degrees, the same would go for SATA if I had any installed.GPU and CPU/MOBO cables are equally well routable and hidden behind the motherboard tray, with enough space for everything and cable-ties to boot.As for the fans, I kept them on the MOLEX Connectors for now, purely because I was lazy, and even then they are not loud. Their RGB is not controllable and is perpetually on.On the topic of fans, I actually played around with the build and the airflow in the case is great, I used a Thermalright tower CPU cooler without a fan on a 10105F and it kept the CPU from melting (not recommended but fun)I did buy 3 additional RING-type ARGB fans of 120mm each and they fitted well (1 at the back and 2 on top.Further to this, fitting the Motherboard before the rear fan would be advisable as the case is tight, and it just makes life so much easier.I cannot comment on the fitment of the 2.5 or 3.5-inch drives as I have not put any in the case (m.2 only)But, from what I can see it would be a case of fitting the rubber grommets to the drive and sliding them into place, where the drives, PSU, and cables are hidden under a shroud from the main compartment.Are there things I would change?Maybe a slim foam strip around the case between it and the glass side (legit full glass side by the way)There is a sizable gap and it does lose some airflow from there, if you do run a negative pressure setup with your fans it will have dust rings around the glass, YUCKIf you want to Corsair, Buy a CorsairIf you want Fractal Design, the Same Applies. NZXT Lian Li et all.This is a small no-nonsense Full ATX case with enough space to not be a waste.If you want light, decently made, good-looking, then this is it, with the bonus of being cheap as chips.To anyone who cannot figure out the fans... Maybe building PC's is not for you?

I have received it used it for a while and it worked just as advertised. They are FRGB meaning they do not rotate or spin. The name FRGB stands for "FIXED RGB LIGHTING EFFECT". They will not do anything but glow in the fixed position. the case has held up great for me and it works just fine. Overall i can not find anything negative to say as it is exactly what was advertised.

To begin with, the 3 fans it comes with are not really RGB, they do not have any control options for the colours or pattern, they just flash in a cycle, basically they are just fans with xmas lights in them. The case itself is basically ok, very thin metal but ok for a budget build. The fittings it comes with however are poorly machined, I had several cross threaded and misaligned standoffs, I ended up using some I had spare from an old pc case. Overall, I'd say barely adequate for the price, and the RGB fans claim is a bit misleading. Also there is no HDD rack so if you have more than one HDD then you will have them floating around loose in the bottom of the case.

It looks great and is an easy case to build in, very sensibly laid out, the included fans were installed and pre-daisy chained so little effort messing around with them. The only element of the build that I had to restart was not paying attention to the standoffs in the case. For an ATX board adding the supplied stand offs before installing the motherboard saves much time in the long run The price was incredible and no buyers regret.

A bit of a stop gap Case before my newer planned build, as my last build died from old age. Great value for money but not great for expensive builds.

This is a fantastic case for the price point. Good looking. I have added an extra fan to the rear and top of the case for extract. Space provided for HDD/SSDs could be easier but once theyre installed its not a big deal. Reasonable cable management options. Be careful when looking at your heat sink options as mine barely fit in the case. Metal knockouts for the PCIE slots are not the best.

its a good looking case sadly bad for cable management also missing a hdd cage and not enough space to route cables properly other then that a ok case

Dommage qu'il ne soit plus dispo car à 37€, un pc fenêtré en verre avec 3 ventilateurs RGB, et bien conçu, c'est une très bonne affaire!

Il laminato è un po sottile ma nel complesso, con le 3 ventole nel prezzo non ci si può lamentare. Buono il vetro temperato

Super Gehäuse funktioniert alles Super, Lüfter sind zwar Molex aber trotzdem super leise. Die Lüfter leuchten auch sehr schön, platz gibt es genug für Kabelmanegment. Top für den Preis.