SMLIGHT SLZB-06M – A Zigbee 3.0 to Ethernet, USB, and WiFi Adapter with PoE Support, Works with Zigbee2MQTT, Home Assistant, ZHA

SMLIGHT SLZB-06M – A Zigbee 3.0 to Ethernet, USB, and WiFi Adapter with PoE Support, Works with Zigbee2MQTT, Home Assistant, ZHA

Q: Do these coordinators work with Zigbee2MQTT and ZHA?

Yes, all models work with both Zigbee2MQTT and ZHA.

Q: Do I benefit from using SLZB-06p7 based on newer SoC C2652P7?

If you do not plan to have more than 200 end Zigbee devices, you do not need pay more for CC2652P7 chip. Moreover, CC2652P and CC2652P7 are based on the same processor Cortex M4F 48Mhz, the only difference is RAM.

Q: Can I connect multiple adapters to the same instance of Home Assistant?

Yes, you can. You will need to run two or more instances of Zigbee2MQTT. Please check out the product manual with an explanation.

Q: Can I use “passive” 24V PoE?

Adapter supports active PoE standard IEEE 802.3af. So Only PoE routers and injectors with this standard will work.

Q: Is it possible to use device in Wi-Fi mode?

Yes, it is. What you need is just choose mode to Zigbee-to-Wi-Fi and connect to your Wi-Fi network.

Q: Are there any delays in Zigbee while using via Ethernet?

No, actually Ethernet 100Mb is much faster rather than the baud rate used for USB serial connection 115k.

Q: My Home Assistant server is located in basement. Can I put SLZB-06 in my leaving room and connect to it via Ethernet?

Yes, basically that is the point for SLZB-06: you can locate your Zigbee Adapter wherever you want and do not stick to the server. Even remote connection remote buildings works.

Q: Can I connect to type-C and RJ45 at the same time? Optoelectronic isolation at place?

Yes. The device contains optoelectronic isolation between USB and Ethernet parts. So you can plug in SLZB-06M to both RJ45 and type-C at the same time.

Q: Do I need to change powering either from POE or USB? Any switch?

No. You do not need to think about tit. No switches. Just plug in POE or type-C or both – and the device works. It distinguishes power sources and acts correspondingly.

Q: How to select mode USB/Ethernet? Any physical switches?

The device can be switched between USB or Ethernet either through a web-interface or by button. Just short press – and the work mode changed. Switching by web interface allows changing the work mode distantly.

4.5/5

Product ID: 606701681

Secure Transaction

Details

Brand
LOAMLIN
Hardware interface
USB 3.0 Type C
Colour
Black
Compatible devices
[Most of the
Data link protocol
Bluetooth USB
Data transfer rate
100 Megabits

🌐Zigbee 3.0 Gateway

📶Dual Mode Operation

🔌POE Support

Frequently Bought Together

SMLIGHT SLZB-06M – A Zigbee 3.0 to Ethernet, USB, and WiFi Adapter with PoE Support, Works with Zigbee2MQTT, Home Assistant, ZHA

THIRDREALITY ZigBee Smart Plug 4 Pack with Real-time Energy Monitoring,15A Outlet, Zigbee Repeater,ETL Certified,ZigBee Hub Required,Work with Home Assistant,Compatible Echo Devices and SmartThings

THIRDREALITY Zigbee Vibration Sensor, 110dB Alarm, Adjustable Sensitivity, Works with Echo, SmartThings, Home Assistant

Description

🔗 Connect, Control, Conquer your smart home!

READY TO USE - Pre-flashed and ready for action—no hassle, just plug and play.
EXPAND YOUR NETWORK - Easily add multiple coordinators for expansive coverage.
ENHANCED PERFORMANCE - Experience superior signal strength with +20dB gain.
SEAMLESS CONNECTIVITY - Transform your smart home with effortless Zigbee integration.
VERSATILE POWER OPTIONS - Power up with POE or USB-C for ultimate flexibility.

The SMLIGHT SLZB-06M is a cutting-edge Zigbee 3.0 adapter that seamlessly connects to Ethernet, USB, and WiFi networks, featuring POE support for versatile power options. It is compatible with popular open-source automation platforms like Zigbee2MQTT, Home Assistant, and ZHA, allowing for easy integration and expansion of your smart home ecosystem.

Have a Question? See What Others Asked

Do these coordinators work with Zigbee2MQTT and ZHA?

Do I benefit from using SLZB-06p7 based on newer SoC C2652P7?

Can I connect multiple adapters to the same instance of Home Assistant?

Can I use “passive” 24V PoE?

Is it possible to use device in Wi-Fi mode?

Are there any delays in Zigbee while using via Ethernet?

My Home Assistant server is located in basement. Can I put SLZB-06 in my leaving room and connect to it via Ethernet?

Can I connect to type-C and RJ45 at the same time? Optoelectronic isolation at place?

Do I need to change powering either from POE or USB? Any switch?

How to select mode USB/Ethernet? Any physical switches?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

$303.14

Duties & taxes incl.

Ecuadorstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

View all Trustpilot reviews