Geemarc CL7400 Opti - Amplified Wireless TV Headphones with Optical Connector - Over Ear Headphones for TV, Smartphones and PC - Low to Severe Hearing Loss - UK Version

Arrived quickly. Great product. These mean that my father can listen with the volume right up without deafening the rest of us.

First let me say that these headphones are very good. I can now watch TV without subtitles! All the various connections work, but if using the 3.5mm jack, this will cut out the TV sound to everyone else. This is “normal behaviour with the 3.5 mm jack. As others have said, the size of the ear cuffs is barely adequate. I have quite small ears, yet they do not fit inside the cuffs of the earpieces. The range is nothing like advertised – if there is a wall between you and the base unit, it is hit and miss!There are at least two versions of the instructions to be found on-line. One is mostly pictorial with brief descriptions in several languages. The other, entirely English. Both are wrong or very ambiguous in places.Because of multiple problems, I contacted Geemarc Help by email. They were, indeed, very helpful – but of course all this would have been unnecessary if the instructions and the advertising “blurb” were correct.The English instructions and many web-site summaries, and even some of the reviews here state that the volume is independently controlled for each earpiece. This is not so. There is no “independent” volume control to the earpieces – the right (or left) +/- buttons on the headphones increase/decrease the volume on both sides.The balance control does adjust the volume between the left & right earpieces, but it does not function as described. In fact, the controls seem counter-intuitive. When the balance control is activated, the “+” sign on the right moves the sound to the left earpiece (in steps of 25%) and the “–“ sign on the right moves the volume to the right earpiece (in steps of 25%). In a similar manner, the left “+” sign moves the sound to the right earpiece and the left “–“ sign moves the sound to the left earpiece. For me, the balance is the most important setting as I have significant hearing loss in my right ear, and less so in my left ear. After the “balance” is set, the volume control will increase the volume proportionately to both sides.On some websites, the description seems to imply that the tone can be adjusted on each side – this is not so. The tone is adjusted similarly to both earpieces simultaneously.All instructions state that multiple headsets can be paired. But I, like others, was unable to do this following the instructions in the booklet. After receiving further instructions from Geemarc, pairing worked. This is the instructions I received, but expanded to make them clearer. (1) If the headphones are already paired with another base unit, ensure that that other base unit is switched off. (2) switch on base unit to be paired and ensure it is receiving an audio signal from the TV – the light on the base will be green. (3) switch on the headphones to be paired (since they are not paired to the “live” base unit, the light on the headphones on/off switch will be red). (4) Now press the “pair” button on the base unit for 3 seconds – the green light on the base unit will start to flash. (5) Now, press and hold the (red) “on” switch on the headphones – it will go off – ignore this and keep pressing the switch - it will start flashing green– you can stop pressing now (sometimes it becomes a constant green for a short time). (5) The green light on the base unit will continue flashing; the green light on the headphones (flashing or otherwise) will turn red; in a few seconds both the base unit and the headphone light will be a steady green. YOU ARE NOW PAIRED!A description is provided for the direct connection of the headphones to an audio source using the 3.5mm jack plug. BUT, an important fact that is not stated - when used in this way none of the controls on the headphones work. Even the on/off switch has no function. What you hear (volume/tone/balance) is entirely controlled by whatever piece of equipment you are plugged into (mobile phone jack plug, MP3 player, HiFi, etc).Finally, a point to note is that in these headphones the battery is not replaceable. Many “competitor” TV headphones have “normal” rechargeable batteries which can be replaced when they no longer hold a charge. At the moment, the CL7400 OPTI headphones will have to go back to Geemarc – price unknown.

set head phones up but sound keeps coming and going not very good got intouch with geemarc the told me to send back to you for replacement

Worked straight away no set up required good sound quality comfortable to use value for money

Brilliant my husband can watch television without it being much too loud for me. My husband is very happy with the headphones he says they are very comfortable

The Geemarc CL7400 Opti performed well both on the TV and set top box. Easy to setup and operate. Good and clear sound. However, as soon as I powered on an Amazon Firestick, that is when things went wrong. Interference from the Firestick generated a continuous pulsing sound over the headset, rendering the unit unusable. Switched off the Firestick and it returned to a fully working and really good device. Returned the item as it did not perform as expected.

Purchased for my hard of hearing mother-in-law as her TV is normally on max volume. It's a great piece of kit, easy to setup and crystal clear in its sound. Unfortunately my mother-in-law is also a techno phobe and refused to have anything to do with them. They aren't complex nor do they require any technical knowledge, she just took against the idea of wearing headphones so unfortunately we have returned them. I would recommend them to most people.

Great when it's working (I'm significantly hard of hearing but not deaf) but poor durability. I'm onto my 3rd set but each time the connections within the headphones eventually break ( last 2 years max), just from widening it to put it on and off my head. And the unit doesn't offer replacement headsets. So I've bought 3 complete units over the years. Can't and won't keep doing this. Should be more flexible construction.