10 PCS 0.047x10.24" Steel Pushrods And 10 PCS Nylon 0.79x0.43" Lock on Control Horns 4 Holes for RC Airplane Model Aircraft DIY Parts

Works great, makes your designs look a lot better

These are good solid pushrods with excellent nylon fittings

What appears to be a nice package of pushrods clevises ands servo arm connectors is somewhat flawed. The nylon clevises are supplied with tiny set screws that are self tapping into the nylon and are supposed to lock the clevis in place on the steel pushrod like a set screw. In my opinion this is highly unreliable and I would not use these clevises on any of my models. Alternatively, one can use the pre-bent Z on the control horn end and the servo arm connectors on the servo end. I am a bit skeptical here as well because the servo connectors are fastened to the arm with a small nut that is not a lock nut and tyhere is no lock washer supplied. Hence, you have to rely on locktite to insure that the nut does not come loose. I am not a big fan of locktite.

Their cheep and they work really well haven't run into any problems and they are easy to use and adjustable

If you have a RC plane from China and need to replace broken quick links, these did thread onto the pushrod wire. All my made in the USA links were too large. This fit a Hobbyking 1200mm FW-190. Might also fit the Dynam products in the same size.

This product worked very well for my project. The steel rods are very tough and that’s a good thing. I was not using them for their stated purpose, however. I used them for rods for model railroad Tortoise switch machines. Perfect for that.

I really didn’t have any idea how big these were before I bought them. They won’t fit my initial use of them, but I’m al ays building or changing something. I will use them. The first pic is what I was looking to reproduce with what I received in pic #2.

They worked perfectly on my RC boats would buy them again