SarisBones Car Trunk Bicycle Rack Carrier, Mounts 2-3 Bikes, Black - Durable, Rust-Free, Anti-Sway Straps, Fits Most Vehicles, Made in USA, Arc-Based Design, 100% Recyclable Materials

Never having used any product like this before, I was a bit apprehensive and wasn't sure it if was going to fit my car or if it will work.As suggested by another reviewer, I chose to watch a video instead of following the 2 page instructions, which was a good call I think. Wasn't too difficult to set it up, having 2 people helped as one person was able to hold the rack in place while the other put on the clips to various places on the car & tighten the belts.Took about 10 mins to set it up and we were ready to go. We needed to use only one bike for now, which fitted quite well. I had separately ordered a couple of straps to keep the front wheel steady, which came in handy.We drove from Birmingham to Cambridge on combination of motorway & A roads, and had no issues. By the end of the trip, we did notice the rack had gotten a bit wonky, most probably because I didn't tighten one side of the belt properly. Or perhaps the clip could have moved a little, loosening the belt a little.Overall, quite happy with it. Now the issue is where to store it, as it's not small :). Need to find a place in the shed.

Ready to set up but could take 2 goes to get it spot in the first time. Easy to attach to the car. I have a Mercedes E220 saloon and it fits well. I would be concerned about the metal clips on the bit edges chipping or making the paint after time but it’s ok presently. It’s tricky putting on the two bikes but practice will make perfect.

Bought this for our Vauxhall Vectra. Takes a bit of work to follow the instructions, as there are only diagrams, not words. Worked best for us to have the heavier bike’s front wheel pointing right and the lighter bike pointing left. Once we got it set up it does the job well, and folds up small.

I'm really happy with this, it appears well made, it's sturdy, secure and does the job. Thick rubber pads prevent it leaving marks on your car as some bike holders can. Build quality seems really good.

Simple Faff free fitting and instructions, with the rack and bike feeling safe, sturdy and secure on the back. Have to confess my only worry is that the rear numberplate is partially obscured.

Very easy to set up. Sleek design. Holds two bikes of any size no problem. Even kids bikes 12" and 14" can be attached easily.

The Saris Bones 2 rack is well made and designed, simple to assemble, compact to store and really solid on the back of the car. I’ve got an electric bike with a built in battery in the down tube so the anti sway straps don’t fit, but I just use some bungees for that purpose, the straps will fit a conventional bike.One downside, despite it being recommended for our car, Skoda Rapid, a fitted bike obscures the number plate which may cause an issue with the police. I plan to fit a temporary plate when using the rack again.Otherwise fully recommended.

Having heatdkybused this product, on the 2nd time it was used to carry our two bikes, one of extra straps snapped off- so very disappointed it breaking after only the 2nd use.There doesn’t seem anyway I can complain about this through Amazon