Microtek EM 4160+ Automatic Air Conditioners (A.C.) Voltage Stabilizer upto 1.5 Ton Working Power 160V-285V(Metalic Grey) with 3 year warranty

The media could not be loaded. +4160 is best product of microtek it has many safty features it saves electricity and provides safety to your Ac and refrigerator.

Being situated at a very close proximity to the line transformer,occassional equipment failures due to high voltage are experienced at my house.Hence a microtek stabilizer EM 4160 is connected to one of the circuit mains where several electronic equipments are connected.On 4160 model,input and out put voltages are readable on the display.( Stabilizer is connected online 24x7) . The input voltage varies from 235 to 257 volts.Upto 240 volts, the input voltage is received as the out put without any correction. Above 240 volts, level 1 step down correction starts with a drop of 27 to 28 volts from the input voltage. So far the system is alright ( except for a 10 second delay after each power failure).

The media could not be loaded. You can check in the video: IP 200V OP 241V; i.e. almost 20% INCREASING CAPACITY. Build quality is descent enough. If you want a fancy one, there's a PEARL VERSION of it. Product doesn't come with installation facility in most of the PIN CODES.Stabilizer runs quite soundless, if there's a step up required then you can hear a single "khat" sound.Time delay facility available, 10 secDisplay is PURPLISH WHITE, Visible, Bold enoughOverall GOOD PRODUCTIf you're living in an urban area where the voltage fluctuation is minimal; you can go for this 160-285 V range; no need buy 90-300 or 130-280V etc.

Waste of this product, iam buying this inverter it's out put not working, company numbers and mail and what's app numbers not working, not buying this product

Superb Gujarat supplier never disappoints you

good

Excellent value for money considering the build quality and features (metal body, digital display etc). I noticed a few things when using this voltage stabilizer-1. The input and output voltages shown on the display are approximately 4V lower than the actual value as measured by a multimeter. However, this is not a defect as this is well within the calibration accuracy of 2.5%.2. The power cable is only 1 sq. mm which is too thin for a 1.5 ton air conditioner. Even a voltage drop of only 0.5V causes a power dissipation of almost 4 watts in the wires. The cable gets a bit warm after a few minutes of running the AC.3. Some reviews here incorrectly mentioned the power cord being aluminium, but it is copper with tin-coated endings. For those of you who don't know, you can't connect aluminium wires directly to the brass terminals of normal plugtops. The aluminium will corrode (galvanic corrosion between dissimilar metals) and burn out in a matter of days.I wanted to give this stabilizer five stars but had to reduce two stars for not providing thicker wires. Having 2.5 sq. mm would have been ideal, but 1.5 sq. mm should be fine too. I would have returned it had they used aluminium wires.

Well product nice packaging well and best rate product like it thanks for amezon