8Pcs Wood Plug Cutter Drill Bit Set, High Carbon Steel Titanium Coated Woodworking Chamfer Drill Bits Straight and Tapered Taper 6mm/ 10mm/ 13mm/ 16mm Woodworking Tool Set

Took and a chance after reading the bad reviews. Followed instructions and used with drill press. Worked great with synthetic material and soft wood. Didn't use with hard wood, probably not the best. I don't know what's up with the bad reviews.

These bits are making good plugs, but I am confused by the measurement markings. I purchased a metric set, but found the smallest bit, which should have been 6mm, marked as 1/4". The plugs produced were 7/32" or 5.5mm. Is this the normal tolerance for this kind of tool?I use the plugs as fret markers on guitar fingerboards, so an exact measurement is important. I was able to make these work.

Trabajan bien. no las uso con frecuencia pero es necesario para mis necesidades en mi juego de herramientas.

Was making plugs out of oak on first attempt. Became instantly dull. Crap steel

None of the cutters produce a tapered plug. The "tapered" cutters produce a cylindrical plug with a chamfer on the end. They will be a loose fit in the hole they are sized for. (But they are sized metric, and marked imperial. E.G. the cutter labeled 3/8" produces a 10mm plug. the plug is too big for a 3/8" hole, and a loose fit in a 10mm hole.) On the bright side, the cutters I received cut well. I was able to quickly make a large number of plugs of a useless size.

Great material

I was cutting a plug out of red oak and the largest bit was dull before I finished the first cut. I have used the other bits in pine and they seem OK.

very goodB0CF9B9HBW