QWORK® 3 IN 1 Motorcycle Handlebar Control Switch, Headlight Switch Turn Signal Switch Horn Switch Mount on 22mm 7/8 Inch Handlebar Suitable for Motorbike Electric Bike E-Scooter

Brilliant switch 👍

Very good switches, they’re kinda stiff buttons behind the rubber membrane. In practise they’re fine to use. The sizing of the cables are tiny, so if you’re fitting to power a headlight or non LED indicators, fit a relay to handle the current draw otherwise the switch will fail.By far the nicest looking switches I’ve come across! Fitted to a WR450F so wanted something small and discreet.

nice compact switch cluster , fairly easy to workout and wire in , has neat led,s in the indicator and light switches (thats what the red and black wires are for ) also the indicator switches are toggle type so you can press both for hazzard lights toohorn wures are one live in and one out to a grounded hornwires are pretty thin but seem tough enough , i crimped bullet conecters straight on top of the pins that came on the ends after a little trimming , worked a treat

Good item

I bought this control switch as a replacement for a similar switch in an e-bike light kit that included rear and front lights with a horn. The controller in that kit worked for the main lights and horn, but would only flash the left turn indicator.This control switch is exactly the same and will only illuminate the left button, and only flash the left indicator. If you are looking for a replacement, avoid this supplier if you want the indicators to work.I found a YouTube video demonstrating how this switch should work. When i followed the same instructions it was clear this controller is faulty.The lights in the kit will function when tested independently of this switch.

Fitted to my e bike so weather should not be a problem, cable that came with it was just the right length . Simple set of instructions would have helped.

Brilliant little switch, Ideal for what I needed just struggling to get the horn to work? Any ideas thanks

Nicely layed out controller