GAESHOW12 Inch Wheelchair Wheels, Wheelchair Front Wheels, Wheelchair Caster Front Wheel Replacement, Anti-Slip Polyurethane Wheelchair Wheels Replacement for Wheelchair, Wheel Chair Accessory

I used this to replace a wheel for pram. It arrived before expected and worked perfectly. It's the same dimensions as pram wheels but sturdier. I used two 10mm bearing rings as spacer to make it flush on the pram axle. The wheel works perfectly as a replacement. It's a little heavier than a pram wheel becuase it's not made pf plastic, and this weight does increase drag in soft ground, but this is not noticeable in urban environments. Good quality product usable outside of its primary use case

I got these as replacements for my wheelchair after the ones that came with the chair broke. These are a perfect fit and stronger than the original ones on the chair. And the price is good to.

Overall pretty good. The only criticism is one mentioned by others in that there is no spacer between the two ball bearings and I had to fabricate one.

These were spot in, a direct replacement for 12inch wheels on a manual wheelchair. They come with no bolts or fittings but we just used the originals and worked a charm.

I ordered the wheels on prime, they came very quickly. When I went to fit them, I found that the bearing will slide in to the middle of the hub if you tighten them too far. I was able to get the bearing back out. I looked at the wheels that were on the chair and they have a metal sleeve in between the bearing to stop them coming together. I ended up using these sleeve on the new wheels. I do think if you weren't aware this could be quite dangerous as the wheel effective become loose. Mine weren't really fit for purpose.

Replacement for perished tyres, perfect fit .

The Good points are the tyre is excellent and the wheel is very sturdy.The Bad points are there is NO metal cylinder between the two ball bearing discs, in the hub of the wheel, so I cannot Safely tighten the wheel to the chair. There is NO supplied rod, so I had to use the old one. The hub of the wheel is quite wide and is difficult to place on the chair.

Took a while coming direct from china but well worth the wait.