Nilight ZH411-A 12Inch 12 Inch 300W Triple Row Flood Spot Combo 30000LM Led Off Road Lights for Trucks with 16AWG Wiring Harness Kit,2 Years Warranty

This light is very bright and was very easy to install. Great build quality and came with more than enough hardware and wire to complete the install. So far has been water resistant and functions as I had hoped. Great value!

The install was relatively easy after watching a few YouTube videos. I didn’t use the switch that came with the wiring harness. We simply disconnected the original switch and spliced its white wire with the existing blue wire (hi-beam) on the 2002 Honda Rancher. By doing that, the low beam works as usual but when switching it to hi-beam, only the light bar will activate. I purchased separate mounting brackets also sold by Nilight. It’s a fantastic light and the mounts are as well. I am very happy with it and I recommend this product.

I have no complaints. They’re bright as heck, they’re well made, and dead easy to install. Installed a pair of them on my brush guard and wired the relays into a single switch on the dash (the switch installs nice and snug into a 1in hole - I drilled into an unused section of dash near the bottom). For more beginner users - If using multiples of these, you can splice the switch wires together to switch multiple lights at the same time. Do not run multiple lights off one relay though. It will blow your fuse or blow your relay if you try to use a bigger fuse.One more thing - don’t use these around other drivers. You will blind them and possibly cause an accident.

Love the lights nice addition and very bright!

I bought these lights to point at the side of the road and in the ditches. They work well but I was hoping they would have been a little brighter. However they might be bright enough if you have them facing straight ahead and forward to light up maybe about as far as your high beams. I just thought 300 watts would have been brighter. Still a good light instead of spending over 1000.00 for something comparable.

I purchased this lightbar to augment my wife's quad after an unexpected ATV ride had us in the dark. Stock headlights were insufficient for safe riding at speeds over 20mph.Quality and build are solid. I wanted a smaller switch than the OEM switch.Bear in mind the wiring harness is made by default to run the relay direct off the battery constantly. I removed the constant hot (red) wire lead from the junction closest to the switch using a tiny flathead to release the wire catch, reterminated and connected the red wire to an ATV power source that was switch controlledr(12v socket). I wired this to a simple SPST toggle with dual leads. The black wire was not needed. I soldered and sealed the modified red line and the white wire into the switch. Flipping switch now feeds 12v into the white wire, and turns the relay on, but now only when the key is on. Lights less likely to get left on and leave you stranded. Hope this helps someone!

I ordered this to mount underneath my 20 foot utility trailer and I wired into the reverse wire so I could have better visibility at night when backing up my trailer. It works great and I can finally see where I’m backing the trailer. The quality seems to be good and I’ve used it in the some nasty weather without any issues.

I bought this in 2022 it’s 2025 it’s still running strong! Love the brightness of the light and great price.