Bissell ProHeat 2X Attachment Hose. For Models 8920, 8930, 8960, 9200, 9300, 9400, 9500

Fit well, good value for the money and seems durable and quality hose. Went on easy too.

Fits our Bissell 9300-1 perfectly. But, it was not very easy to replace. I couldn't get the front cover off even after taking out every screw I could find. I ended up prying the handle open with a screwdriver and being very careful not to break anything.I used the screwdriver to keep the side open while I fed the water hose through the handle. Once I could reach it with the longest needle nose pliers I had, I was able to pull the rest of the hose through the wheel and attach it to the connection. Need lots of patience. Works great!

Are you f-ing kidding me? My machine was fine except for needing a new hose. This should have been easier. Poor design. The WORST design. They just want you to buy a new machine if anything that should be fixable breaks.Comes with no instructions. No instructions online.I'll never buy a Bissell again.

Good price, arrived quickly and the genuine article. My old hose split and needed a replacement. This not only does so, it's far more supple and slightly longer so it winds onto its holder far, far easier than the old one. Most heartily recommended!That said, replacing the hose is not at all for the faint hearted! The Bissell has to be almost completely disassembled as the cleaning fluid hose connects deep inside the base of the unit, requiring such disassembly. Fortunately, the Bissell service manual is available on the Web. Unfortunately, I had to drill out a half dozen of the many screws as they were rusted beyond recognition. On reassembly, I replaced them with stainless steel ones so that shouldn't happen again - well worth the dollar or so.At least while doing all this I was able to thoroughly clean the entire unit's interior, hoses, etc. It now works like new which is saying a lot.

Why pay some service center for repairs, when you can do it yourself? Although you pretty much have to disassemble the lift off to make the repair it is relatively easy to install. The hose arrived in a timely fashion, in a much to large box. 4/5

So to replace the hose you must take apart the handle and the base of the machine and remove the right wheel. I never could get the wheel off but once the base of the machine is opened up you can follow the tube g to where it connects to a junction held by a clip . Whew. I actually cut the hose and then tore the old part off. I shaped up the tubing o. The new hose and fed it through the opening g in the handle through the wheel up to thjunction. The old hose was inserted through a spring from the wheel to the junction I fed my new hose through this and though the clamp and attached it. It is a very very I volved and I could not find any videos online should have made one

There were some previous reviews that claimed this piece fits with the Bissel Little Green Pro Heat. As seen by the pic, the head of the hose is too short and does have the small plugs to form a tight fit. Rather this item has a turn lock which the Little Green Pro Heat does not utilize. All other aspects of this hose seem to be accurate but the connector at the base of the unit requires a longer/different adapter than this item provides. Be mindful this item is NOT universal with all Bissel Pro Heat units.

Perfect fit and excellent quality and fast shipping!! Exact factory match! ! Great quality material, can't tell the difference from the original! ! Other than its new and not broken! ! Lol