🔗 Bond Beyond Limits with 3M Scotch-Weld!
The 3M Scotch-Weld Epoxy Adhesive DP110 is a flexible, fast-setting, two-part adhesive designed for industrial use. It bonds effectively to a wide range of materials, providing strong, durable connections with impressive shear strength and quick handling times.
A**N
sticks like nobody's business; very thick, takes effort to apply
like the previous review mentioned, the viscosity of this material makes it likely to break the tabs if you use an inferior applicator that doesn't hold the nozzle due to the tremendous pressure built up when the epoxy starts to set up.Get the proper applicator: automix heavy duty 2oz. (all metal, holds the nozzle with a steel strap).-awr
T**R
Much Smaller Than Expected!
This epoxy adhesive works well, but the size really threw me off—it’s way smaller than I thought it would be. Make sure to double-check the volume before ordering!
E**G
3M Always the Best
Good stuff, used this for automotive butterfly valve repair. Very viscous, almost impossible to use without the specific applicator. Would recommend using the metal applicator. I broke the plastic one due to the amount of pressure needed to get the epoxy to exit the tube.
L**S
Applicator tabs snap off too easily
Those side-tabs (holding the applicator/mixer on) snap off or loosen way too easily.Once that happens, you don't have a seal between the duo-pak and the applicator, and a big mess leaks out all over before it can go into the mixing tube. You'll end up pushing out all the exopy and hand-mixing it, which defeats the purpose of the fancy applicator.So keep the pressure low, and/or use your second hand to push the applicator onto the duo-pak constantly so it doesn't push out and break the flimsy tabs.Great concept for mixing, but the duo-paks should a thicker and/or metal tabs on them.
Trustpilot
3 days ago
3 weeks ago
