WEme USB 3.0 to SATA Converter Adapter for 2.5 3.5 Inch Hard Drive Disk SSD HDD, Power Adapter and USB 3.0 Cable Included

The adapter works as promised with little effort or learning curve. Perfect choice.

Was having problems with original SATA connector not connecting the HDD to the computer. The WEme adapter worked on first connection and has been 100% reliable since.

I didn't buy this usb adapter for hard drive connectivity issues but for optical drive. However I have a use for several SSD and physical hard drives I have whenever there's a need for them. The major motivation behind buying this adapter is coming from what I recently experienced after I finished making my new desktop. My desktop doesn't have any internal optical drive and I did it on purpose because I wanted to use all available reserved bays inside the case for new and used SSD and physical hard drives I had and I new in advance that the use of an optical drive like DVD drive is not that critical nowadays and I can simply buy an external optical drive to connect with any available USB 3 or even 2, but I ended up being so wrong about that. What I experienced in reality that what is available in the market as external optical drive doesn't work with my operating system (Windows 10 64 bit) or I have to pay for a very well known brand which is simply over 100 dollars so I decided to find a practical way which is also cheaper and i did my research and I found this adapter. I wasn't quite sure until I made connections with what I have already had which is two internal optical drive that I used to use in my older computers and there we go. It worked !! And it worked without a bit of any issue. It's important to mention out for those who doesn't know that it takes higher power for an optical drive to be able to recognize by your computer as a functional device and this little adapter made it possible.Very well designed, quiet affordable and hundred percent functional.I highly recommend it to anyone specially those who are experiencing what I did.

Literally a plug and play. Was able to recover several 20 year old drives from malfunctioned PCs.

I was looking for an SSD adapter I could use with my 5 RPi4 systems running Ubuntu 24.04 and these worked great. Command line lsusb -t show the UAS driver for 3.0 was active and ssd-benchmark got 92MB/s on random writes. The dd command copied 8GB at 190 MB/s.I used 6” USB C cables with Micro B adapter since my RPi4s are all rack mounted, which kept the clean look. The micro b WeMe uses enabled the shorter cable as regular USB 3.0 cables don’t come in 6” inches.The picture i attached shows my home rack and at the very top of rack is where my Rpi4s sit.

My harddrive was dying and wouldn't get detected by the OS. So I purchased a new harddrive and it came with a copy of Acronis. However, it failed to mention that I would also need a USB to SATA connector if I wanted to try a transfer.I wasn't sure it was even going to work so I just went to local stores including the most well-known department stores and electronics stores and despite touting all the latest crApple products and every adapter known to man they didn't have a single USB to SATA cable in stock. Turns out they are only sold online. Thanks. ANYWAY so Amazon comes through again, I look online and sure enough they have a bountiful selection and I wasn't even going to order one because I wasn't sure it would even work but Prime said 1-day shipping. So you can't beat that. If it would get here tomorrow, I could live one day without a desktop.So, I waited, it arrived, and I connect everything and nothing. The drive boots up and starts whirring but nothing on-screen. Oh well, the harddrive fails to connect. However, the IT guy in me says oh wait, I know the front USB ports are sometimes wonky so let me try one in the back. I do so and boom miraculously with this cable Acronis picks up my old harddrive and I was able to transfer everything out within about 30 minutes I had done a complete clone of a 2tb drive.Well, the story's not completely over, so then I open up partition manager and try to remove one of the partitions that I don't need and accidentally end up erasing part of what I just cloned. However, since the drive was now added as a normal external drive like any USB drive was, I was able to go to My Computer, and just copy over the files and folders that I wanted to keep using the data cable. It took about 4 hours total, and that includes my time of navigating file structures and choosing just what I wanted. I call that a huge win for this product which worked great!

I'm so glad I bought this USB to SATA adapter! I had a bunch of old hard drives laying around, and I wanted to see if I could get any data off of them. I was worried that it would be difficult or time-consuming, but this adapter made it so easy.I simply plugged the adapter into my computer and then plugged the hard drive into the adapter. My computer immediately recognized the hard drive, and I was able to access all of the files on it. I was able to transfer all of the data to my new computer in just a few minutes.The adapter is very well-made and easy to use. It's also very affordable. I highly recommend this adapter to anyone who needs to read or write data to an old hard drive.Here are some additional pros of this USB to SATA adapter:It supports both 2.5" and 3.5" hard drives.It has a fast data transfer rate.It's compatible with both Windows and Mac computers.Overall, I'm extremely satisfied with this USB to SATA adapter. It's a great way to get data off of old hard drives, and it's very affordable. I highly recommend it to anyone who needs one.

Accessed and recovered data from several 10+ year old drives including WD 3.5" (2 drives), Seagate 3.5" (3 drives), Toshiba 2.5", Hitachi 2.5", HGST 2.5" with no problems, delays, or failures, highly recommended.