Yaheetech Garage Shelving Units Heavy Duty 5 Tier Metal Storage Shelves Shed Utility Rack,180cm x 120cm x 45cm,175KG Per Shelf

I ordered 3 sets to try to get my box room under some sort of control. They have done this, so I'm happy.They are fairly simple to assemble, but you'll need plenty of room to do it. They go together easily and, as long as you tighten the fastenings by tapping them seriously, they then stay together as you assemble them. It's MUCH easier with two people. I didn't have a rubber mallet, so used a 2-foot length of 32 mm broom stale ... it did the job.They are very adequate for a domestic setting so will be absolutely fine for box room/shed/garage etc. They might even be useful in a shop/indoor market stall provided you aren't selling high-end stuff. The metal is fairly thin and twists easily, but when assembled, the units are quite rigid. Although the MDF is quite thin, the supports under the boards give plenty of stiffness, so sagging won't be a problem.They are designed for a 10-hole spacing to give evenly-spaced shelves. I used a 9-hole spacing between the shelves which gives another space underneath, so I've got the area of floor plus 5 shelves ... plenty for my needs. This spacing (about 300 mm or 1 foot) is quite sufficient for most plastic storage boxes/document boxes etc. Of course, you don't need to have equally-spaced shelves, so you have a degree of flexibility. The one thing you DON'T want is a very large space between the floor and the bottom shelf; it's the shelves that add rigidity to the unit. This is a very important consideration.They come with all the bits and pieces to connect 2 or more sets together, screws to attach to a wall and even a pair of handling gloves.For the price, they cannot be beaten! Highly recommended.

First I wasn’t expect anything special or good for that price, however I was very pleasantly surprised. From the very beginning there were plenty of nice things.Firstly – the gloves were included, so you don’t need to do it with your bare hands, secondly – a hint to use a rubber hammer (this suggestion was stated in the instructions booklet, but I didn’t follow it up and assembled it all together without it, however I have to admit, that if I would listened to that, the entire process would be much easier).Entire assemble process is explained in the manual booklet, which is full of diagrams with the step by step instructions, so you don’t need to be an engineer to understand it. After putting it all together I have very nice, sturdy garage shelves, which I could adjust to my needs. I truly recommend this product.

When you open the box you'll have doubts as the frame is lightweight and the shelves themselves are not thick at all. However, as the simple construction begins its starts to take shape and becomes sturdier with each insert. The shelves are well supported so there shouldn't be any bend that I've noticed in plastic units over time.Construction is easy once you take a little time to read the instructions. It comes with safety gloves although I didn't use them.They look good too and you have complete flexibility where you position each shelf.Overall, satisfied given the price and overall appearance.I bought 2 x 90mm and 1 x 120mm.

Sturdy. Easy to erect . My wife and I easily managed. All parts included. Great product.

Good quality, easy to assemble and sturdy. Once loaded it is very sturdy and it also comes with wall plugs and screws with holes to attach it to a wall if needed.

Everything is as should be on time and good value

Does the job

Mould onit after just few short months . Very disappointing.