SanusWSSBM1-B2 under TV Mounting Bracket compatible for Sonos Beam Suitable for TVs from 37" to 70"

I've been looking at this for ages and wasn't sure on it because it seemed pretty cheap and i didn't want to hang my expensive 65 inch TV off of cheap screws and spacers which you need to fit this to the existing TV and bracket.However I couldn't have been more wrong, it's strongly made, comes with all different size screws and fixings and after some bracket alignment was really easy to set.Only advise i would give is don't set this up on the floor and either do it on a dinning table or bed where you are able to let the stand part hang over the edge as will make life a lot easier.

The Sanus Beam TV bracket raise the Beam up to the right height for optimum listening, the higher level tones are noticeably better and dialogue specifically is clearer.I have a white TV and stand (see pic) but couldn't find a white bracket. This doesn't matter because the bottom of the Beam is actually black, so a white bracket would show whereas the black bracket merges into the base of the Beam. You also cannot see the vertical parts of the bracket if you have the Beam raised to just under the TV as shown.It wasn't straightforward fitting the bracket to a curved TV, but once I realised I needed to purchase 4x M8 70mm bolts (local DIY catalogue company had them in stock) and use some extra washers for spacing it was very easy to fit.

easy to fit and assemble. Really fits well with the TV and great for moving the tv and sound bar in one.

Packaging includes a variety of mounting screws and spacers so should work will most wall mount setups. Instructions were clear and mount itself seems sturdy, well built and easy to assemble. Slight design flaw is that it partially covers the optical and network input on my LG 48' C4 but not using either so not an issue for myself

This is an excellent idea which saves drilling holes in the wall and trying to get the Sonos Beam lined up correctly. The quality is very high and it fitted my 43” LG TV first time. I decided to cut the right hand “arm” with a hacksaw to shorten it, because it was covering some of the input sockets. I also had to re-use the existing spacers in addition to the ones supplied, because the bottom part of the TV sticks out too far. The Sonos can be perfectly height adjusted with the adjustable holder, and it looks like it is floating under the TV. 10/10

I have mixed feelings about this product.It is a sophisticated product that has been manufactured to a high standard. The attention to detail is obvious with quality steel pressings with short weld runs to ensure rigidity, all of which are smooth to the touch and pleasing to the eye. The variable adjustment of the hight of the beam when fully assembled is by another well thought out ratchet mechanism.However.... Marketing the product as suits most tv's with a15min fit time is stretching it a bit. Much better had it been marketed as designed for flat back tv's. If ment for curve back tv's alternative brackets and spacers and longer screws should be provided.I have had to order longer screws which should enable me to fit this to my tv but the spacers offered will have to then sit on top of existing spacers. Who ever designed this unit must weep when considering the thought given to produce a well designed rigid unit to then have it precariously tacked on to the tv. Further the horizontal fixing bars which are shaped for rigidity are rendered largely useless as all of the bar flaps about in mid air offering no support just adding additional weight.(Come to think of it the later sentence would be true even on a flat back tv if as advised in the instructions the existing spacers are left in place.)Nevertheless I shall wait the arrival of the longer screws then try and fit alternative spacers to ensure a safe mounting.The afore mentioned quality of manufacture make me want to make this product work. If it doesn't I'll be returning it undamaged of course.So far I am frustrated and disappointed and feel miss-sold.I will update with pictures in the next week.UPDATEOK it's fitted (used 4x 70mm screws) and looks OK from a normal veiwing position but the intended fitting is compromised by the lack of flexible design thought. Why they couldn't use the four universally flat fixing points available on all tv hanging brackets is beyond me. But it works as is and is future proof if you change your tv at a later date.I've attached pictures to illustrate.

Touch pricey but good

When the product is in place it looks fantastic but it was harder than it should have been to reach this point. The arms that extended horizontally blocked the inlet for the power cable and the Ethernet cable so I had to hacksaw a piece from each side. It hasn’t effected how the bracket works and I appreciate that it can’t be made to fit all televisions perfectly but I think it is something that is useful to be aware of.

Sehr gutes Produkt.

It is mounted between the TV and the wall mount, so even though it is only attached to the bottom two vesa holes, it requires you to had parts to all four holes to make the whole thing flat.I mounted it on an older 40" Samsung TV and the horizontal part goes on the lower part of the vesa mount (300x200), sadly this meant it covers most of the ports on the back including the power cable.So I had to use spare parts from other wall mounts I had saved in order for it to come out far enough from the TV for me to actually be able to use it.When this DIY challenge was completed the only noticable difference is that it isn't as close to the wall as it claims to be.The functionality of the handle and being able to pull down and raise the shelf is excellent.I had plans to use the Sonos beam itself as a shelf for a media player and an external hard drive and with the ability to manually adjust the height of the Sonos beam means I didn't have to worry about their exact size.before mounting it. Something a separate wall mount would've required, not to mention extra drilling.In short, worth the extra hassle and it looks very clean.

Das Teil ist zwar gut und massiv verarbeitet, aber zu gross wenn man nicht will das die Halterung vom Fernsehr noch mehr aufträgt. Um Sie zu montieren muss man zuerst die Fernsehr Halterung komplett demontieren und diese dann auf die Sonos Halterung drauf schrauben. Funktioniert aber auch nur bei TV's gut bei denen die Rückseite komplett gerade ist. Sonst trägt die Sonos+TV Halterung Kombi noch mehr auf.

Sehr gut verpackt schnelle Lieferung einfach das aufbauen. Die passt genau. Gute Qualität weiter nach der Bestellung zwölf Euro günstiger beim gleichen Anbieter.Darum einen Stern Abzug

Wie schon erwähnt, man muss die komplette Halterung abbauen um diese zwischen Fernseher und Wandhalterung anzubringen. Bei einem curve, so wie wir ihn haben, sind so viele Abstandshalter nötig das es am Ende weder schön, noch sicher aussieht. Das größte Manko, weshalb ich diese Halterung auch zurück schicke, ist das diese schnarrt bei etwas Lauterer Musik.