uxcellRubber Machine Tool Foldable Accordion Cover Shield Guard 50cm x 40cm

I got it mounted on my bridgeport with a little bit of modification. I had to drill a few holes and even used some high power magnets to help out. Feels very durable and I am sorry I didn't pick one up sooner. No worries

I have a mini metal lathe and chips can damage the ways. This accordion cover is wider than I need but can be cut to size. It is long enough to work with 10-to-14-inch lathes and doesn't bunch up under the chuck.

Good product

Durable and seem to hold up. Very easy to mount.

The mill came with the center front hole drilled and tapped for 1/4x28 threads. I added a 1-1/2”x1/8” x 12” piece of aluminum by drilling and tapping the front saddle way wiper for #8x24 socket head screws and doing the same at the top of the aluminum. I then had to drill three holes at the end of the accordion cover which I used to attached the cover to the top of the aluminum extension on the saddle. This raises the rear of the cover about 1” above the Y axis ways so the cover will fold by itself when the saddle reaches the end of the Y axis travel at the front of the mill. This seems to have turned out well and I no longer have to worry about dirt and chips accumulating at the front of the Y axis ways.

Fit my Witon mill perfectly.

These are better than OEM for my JET Mill. I bought 2 so I would have a spare. Great value.

got it covered