SMALLRIG Power Bank Holder with Cold Shoe Mount, Adjustable Clamp for Camera Cage - 4600

I have a Vixen Polar Star Tracker that runs on AA batteries (but goes through them quickly) or via a Micro USB external power supply. The problem I had was finding a place to put the power bank as the power supply. This SMALLRIG Power Bank Holder is the perfect solution. It is compact and relatively light in weight, which is important as the Vixen Polar can only hold a maximum of 1.5kg (including a camera, lens, and ball head mount). At 53g, this SMALLRIG holder wasn't going to be an issue. I have tested this with 3 different shaped and sized power banks, and all were held securely, making this SMALLRIG holder very versatile. When I placed the item for order it was £17.99 plus a 15% digital voucher discount. It is slightly bordering on the expensive side, but I have no doubt this will last a long time, as I have had other SMALLRIG camera accessories that are equally made to a high standard in terms of design and manufacturing levels.

Smallrig produce great products and this is no exception.What you have here is a rock solid powerbank holder for cameras or rigs with cold shoe mountsIt offers a really simple solution to be able to power cameras and lights for longer simply by popping this onto your camera rig and then slotting in the powerbank of your choiceThe holder itself is stronger than you will ever need it to be. It's not going to break on you, and it grips nice and tight so that your powerbank won't slip or drop out of it at all.You can mount it directly to the top of your camera if you're not using a flash or cold shoe microphone, or you can pop it onto any cage that has a cold shoe mount on it.As always Smallrig has delivered a product that is useful, strong and will last you for life. This is a solid product and one you should check out if you're in the market for something to grip your powerbank!

If you need a lightweight set up for your camera, this holder will do a good job.Its maximum stretch allows it to hold many different power banks. It won't be secure enough to hold a mini V-mount battery, but you'd use a V-mount with that one anyway…It's made of good quality plastic, silicone and alloy. It stretches on a spring mechanism, similar to many phone holders out there. The difference is that the clamp arms are longer and a bit curved to hold the power bank more securely.While I don't think it would be secure enough for some very dynamic shooting, it will do fine with static one or where you just move around frequently.The attachment is quite universal too - you have a cold shoe mount with a ring to secure, but you can unscrew it using an allen wrench and you get a standard ¼” - screw.Overall it's another useful thing to have in my growing arsenal of different photographic adapters. I can already build some pretty customized set ups, so I'm happy with this addition. £18 feels like a bit much for just a battery mount, but it's done to the usual high Smallrig standard. Happy to recommend.Thank you for reading my review. I hope you found it helpful.

This rather useful clamp arrives in a easy to recycle cardboard box. As expected it's made from a mix of ABS plastic and metal, which it makes lightweight and easy to carry. It's also easy to fit to a camera or triod, either with the built in cold shoe mount or screwed on.Once installed the strong spring and rubber grip securely holds most power banks in place. I say most because it's a bit too small for larger power banks and some video monitors. Plus there's no way to tighten the clamp, so it's not really suitable if your camera is moving.Despite those limitations it's not a bad clamp, especially given the reasonable price. Proving to be especially useful when using larger phones as monitors or for holding off camera RGB lights and flash guns. Overall ? It's a well made useful, very versatile camera accessory that can be used in loads of different ways.

Using the SMALLRIG’s powerbank holder either cold Shoe attached or by screwing it into your rig is an affordable way to of adding power to your camera; if it supports usb-c power or you have a usb battery adaptor. I mounted it using the include screw to my camera rig on the side to be close to the battery door to start; and found it imbalanced things too much; it is better to have it somewhere central.The adaptor is small; but spring loaded and capable of taking my medium sized powerbank. It happily holds my somewhat compact 10,000 mAh phone charging power adaptor measuring 19*68*113mm. This width of 68mm is in the middle of its 55-86mm capability. It can hold a mini v mount battery on its side, but the shape of the arms means you will risk it falling as the curved sides of the holder will only grip the top. It’s designed to taking power banks up to about 25mm thick; the shape of those sides also suggests you should use powerbank with curved edges.The 10,000 mAh powerbank has almost 4x the capacity of my camera’s batteries. If you don’t want or need a big camera rig and have a couple of powerbanks then this is a good alternative to using heavier vmount batteries for long shoots.

I was a little skeptical if this would hold a Samsung T7 SSD drive as they are quite small and thin.It holds it no problem at all, it's fits perfectly and very securely. This is sat on top of a camera cage connected to a Sony A7RIII recording video footage direct onto the drive, it can also sit directly onto a camera's hotshoe too.Smallrig make quality products at affordable prices, this is no exception, great item.

As with all Smallrig parts I have this is a well made item at a sensible price. I use it on a Smallrig iPhone frame which already has a front clamp for a battery and this one nearly fits on top to hold the SSD card. I can fit is either by just removing the flash shoe attachment and the screw then becomes the standard to screw it straight on to the frame. If a no tool option is preferred just use the flash shoe fitting but it is a little bulkier the way.