Illuminate Your Drive! 💡
The PHILIPSCANbus adapter LED (H7) is a cutting-edge 3-in-1 solution designed to resolve dashboard warnings and light issues for Philips LED bulbs. With a wattage of 3 watts and a vehicle-specific fit, this adapter ensures easy installation and full electromagnetic compatibility, making it the perfect upgrade for any modern vehicle.
Wattage | 3 watts |
Colour | multi |
Voltage | 12 Volts |
Fit Type | Vehicle Specific Fit |
Light Source Type | LED |
Item Package Quantity | 1 |
G**Y
Worked as Expected
After fitting LED bulbs to my 2005 Audi A4, I was constantly getting a dashboard error with an annoying beeping warning noise. Once these resistors were fitted, the error and noise disappeared. Took a bit of fiddling about to get them fitted. You will need to drill an approx. 25mm hole in the headlight dust cover, to connect the wires from the restrictor to the bulb. The restrictor stays outside the headlamp in the engine bay. The restrictor is quite large and won't fit inside the headlight housing. The kit comes with a good quality grommet that seals up the hole securely. I used a step drill bit to cut out the correct size of hole. If you are going to fit these yourself, take your time doing this, because if you cut the hole too big, you won't be able to seal the back of the headlight properly, too small and the grommet won't fit. If you are competent doing general DIY jobs, minor car mechanics etc. you shouldn't have any issues fitting these. I went for the brand name restrictors (Philips) for quality and general piece of mind. Hopefully they will have a long service life. But as of now, I would recommend these and would buy again. Hope this helps.
T**Y
It fixes the bulb out issue!
Doesn't matter what way you hook it up, it works! Code will still read a bulb is out but no light on the dash. If you power the car off with the lights still on, when you power the car back on, the error will show. Simply turn your light on, then off, then on again and the bulb error will vanish. Best to turn your lights off then power off the ignition. Tested on MK5 Golf.
A**R
Worked in my Volvo v60 2016
Been looking for a little while for something to try there came up for my v60 they fit in the headlight cluster with not chopping or holes seem to work great time will tell but can switch back no problem
C**N
Does not work on BMW 2 Series
Installed in seconds but with my BMW 2019 2 series still getting bulb failure warnings, which is disappointing. Returning to Amazon for a refund.
K**T
Works.
Hi, brought this for father's day gift along with Phillips 3021 led bulb.Father tried to use a cheaper brand but to no joy. This canbus box & 3021 bulb was a bit more money but they work & father is very happy. Fitted to w211 e class mercedes, & checked by a professional headlight alignment tester. Hope this helps you. Item was well packaged & delivery was good time, 5 star review.. for package / delivery time / easy fitment / works / colour / brand. Thanks. (Sorry to edit.. not sure on how long will last due to only just fitted).
G**H
Prevents LED flickering and dimming.
*Excellent*I've bought a philips LED-HL, Ultinum Pro3021, and unfortunately because of fluctuations in power draw ( could be my old battery as well ), the leds where flickering and dimming, only when power was needed, so starting the car, idling in low rpms, first gear low rpms... so on.Bought this to try, as it would stabilize the incoming voltage, and it did the trick. Low rpms, starting the car, turning the steering lock to lock, all with a stable non flickering led.Can't recommend enough.Obviously the photos are the led working, and not the product, but you get the idea.For those wondering about CANBUS, I unfortunately can't say if this does work, it says it does, but my leds without this product didn't throw errors in the dash, and still don't show any errors.
M**.
Does the job
Nice and perfect for the job
M**Y
Did the job
That's it.
L**8
Ottimo
Installazione facile (prepararsi a forare la calotta originale per permettere il passaggio dei fili), vedremo la durata nel tempo.La scatolina che contiene l elettronica è piuttosto ingombrante quindi prevedere un posto per l installazione prima dell acquisto Errore canbus eliminato su skoda fabia 2019.
F**E
Funktioniert ohne Probleme
Funktioniert ohne Probleme.- Leichter Einbau- Keine Fehlermeldungen mehr im Kombi das die Beleuchtung defekt ist.
M**O
Recomendado para no dar fallos
Canbus recomendado para que no arroje fallos en el coche. He probado la luces sin el canbus y parpadeaban al encender el coche. Montadas en un Tucson 2017. Instalación sencilla.
F**S
Works as expected.
Equipped a Ford Galaxy WA6 2011 with Philips Ultinon Pro6000 H7 and this adapter. The dashboard warning disappeared, as advertised. The included tie wraps were too small, I used larger ones to mount the modules. The connectors are small enough to hide behind the reflector in the headlight unit.
S**D
Nickel
Fonctionne sans soucis sur seat Arona 2019
Trustpilot
1 week ago
1 month ago