Creality Official 3D Printer Enclosure Fireproof and Dustproof Tent for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo/Ender 3s/Ender 2/CP-01, 3D Printer Cover Storage 720x600x480mm

Creality are a company that shows the quality and reliability that CAN be achieved by Chinese design and manufacture. Along with DJI (designers and makers of high-end drones), Creality, one of the leaders in affordable 3D printers and accessories produces top-notch equipment at a very competitive price point.This cover is constructed of a substantial fibreglass frame with a heavy duty black cloth outer. The inside of the cloth is coated with a reflective layer. DIY construction is simple, the frame using push-fit connectors throughout. The cover fits easily over the frame thanks to handy zip fasteners.The cover is a generous size, allowing for access to all sides of the 3D printer inside. There's a handy inlet for the power cable, and plenty of room to clear the top of the filament roll. A pocket on the outside of the cover provides storage for those bits & pieces you may otherwise lose, and the front of the cover has a large transparent window so as to observe the printer without having to open the cover.The cover serves to protect the printer from dust and to help deaden the sound during printing.A great buy at a very reasonable price. Highly recommended. AAA+

I bought this thinking that the price and quality would match but the quality is far better than expected. Fits nicely in my spray booth and worth every penny.

Difficult joints to put together, require some serious force to get the tubes to butt up and one broke when while pushing it so hard, if they made the white joints just a little bigger so the poles slide in with no effort it would be 5 stars as the material feels good and thick and looks good once together, if you can get the joints butted up without them breaking or print new ones that will slide on the tubes and its good value for money overall, just let down by the joint component.

I bought this for my Ender 3 S1 Pro.As others have noted, it is a very tight fit to get the frame into the casing, when I first lined the frame up I genuinely thought that there was no chance it would fit, but I gave it the benefit of the doubt and, to my suprise, it did fit!It was tight though, you have to kind of nudge one side in, then the other, rinse and repeat. I think one reason is that the casing comes all folded up and as you pull it over the casing, it opens the casing up more (kind of like how a fresh t-shirt out of the washing machine seems small until you wear it for a while).Anyways, it's constructed now and it looks awesome, the zipper goes from the front (near the bottom), all the way up and across the top to the top-back so you can get to your filament spool.I haven't put my printer inside yet but will do so tonight and update once I have my desk rearranged to take this enclosure.

Whilst making the frame work the cloth enclosure is too small to fit around the frame. Causing the cloth to rip. Very hard to install, i will have to modify the frame to make the enclosure usable.

i need a cover for my ender pro v3it arrived in box and one opening there is some assembly to do, assembly was easy enough and once up is a lot more stronger and durable than it looks. it offers good protection for your printer helping to reduce dust on the printer and other issues. the large zip opening allows full access to the printer for when you are using however it can be closes during use to help keep draft and dust from print bed and nozzle.over all does the job well

Delivered promptly, as usual from Amazon.Frame is easy to assemble. I have seen reviews where the user complains of breakage when constructing the frame or the cover does not fit.With a little patience, a dab of lubricant (washing-up liquid) a steady hand and gentle tapping the frame assembles easily. The joints must be fully home to enable the cover to fit easily.When constructed the cover is sturdy and excellent for my Ender-3 Pro.Very pleased with this product, and would recommend.

For a start, no instructions so some mucking about finding the right combination of the 3 rod lengths to get the frame the right size, but once that is done, it’s a sturdy heavy gauge enclosure.Needs filament real top mounting though really, you can get through the side access panel, but it’s not ideal.The plastic joints for the rods are rubbish, way too soft and break easily, which is unfortunate as the fit is very tight, and it takes some effort to push them in.

Habe nach Erhalt sofort getestet ob es feuerfest ist (20 Sekunden mit dem Feuerzeug von innen erhitzt). Die äußere Schicht Stoff schmilzt/verbrennt zwar, aber die innere Schicht aus Metallfolie bleibt standhaft. Leider etwas Schade, dass das durchsichtige Fenster nicht feuerfest ist sondern schmilzt. Aber da die Feuergefahr eher von der Rückseite des Druckers ausgeht ist das meines Erachtens nach in Ordnung für den Preis. Foto: Die Metallfolie zieht sich etwas zusammen, ist aber dennoch stabil und reißfest.

Does it's job, nice designe, a lot of space around except the hight, the fillament doesn't really fit

Je recommande vivement, excellente boite d'imprimante 3d

Facile da montare ed adatto anche per 3 Neo. Ovviamente non va seguito il video di riferimento visto il differente modello.

Très utile lorsque l'imprimante est dans sa tente de protectionInstallation simple malgré un peu de bricolageMais résultat parfait, fonction et esthétique