PLA 1.75mm 4x250g Gold/Silver/Glow in Dark/Temperature Change - Filament Set for 3D Printer - FrontierFila

Currently tried out 2 of the 4 filaments (Temperature Change + Gold). I find the material very easy to use, and seems more premium than cheaper/ value PLA. If I find any problems with the other 2. I will update here. It seems pretty strong and has some flex to it when printing thinner objects. Also the Temperature change filament does change colour from just the heat of your hands.

Have used this filmant now on two jobs over 4hrs long each. Filament printed great at 200c with no heated bed. Colour changing filament changes colour really nice. Will be buying again once I've used it all haha.

Pretty good for experimentation, especially with novelty filaments like colour changing and glow-in-the-dark.All filaments print fine at 220c (go lower and you may have first-layer adhesion issues) with the exception of GITD, which needs to print around 10c hotter in my experience.Gold:Doesn't contain much (if any) metal particles as far as I can tell, but does sparkle in the right lighting conditionsSilver:Quite similar to gold, but seems to sparkle a little bit less.Glow-in-the-dark:Glows well enough when "charged" with a flashlight, or when left for a while with some ambient light. So far I've used it to print some keycaps for a sound mixing desk and some flashlight covers. I imagine it will work well for items that you need to find during a power outage, provided they are able to "charge" beforehand.Do note that this filament most likely contains strontium aluminate, which can and will wear down your (brass) nozzle.Temperature change:Changes from dark green (20c ambient) to yellow-greenish after holding it in your hand for a while. I used it to print a replacement Xbox controller faceplate, but unfortunately it broke while I tried to remove the supports. Could be the filament, could be my print settings (I used rather low temperature settings initially).All in all I'm pretty happy with the pack. It's not much more expensive than 1kg of conventional PLA, but you get 4 different filaments instead. Here's to hoping more packs (wood, TPE, carbon?) will be offered soon.

Loved this set, bought it really for the glow in the dark. Cannot complain. All 4 filaments were nice in quality and gave good results. The colour change filament is yellow to green (you need to get really hot for yellow - at skin temperature it turns light green). Its an easy print. Mostly I printed on Prusa mk3 using Prusa PLA settings but it worked beautifully also on CR10 mini with a little hotter temp than usual. I will certainly be trying more of their filaments in future.

i got on great with these filaments , well packaged and spooled well.i was printing at temp 200 and the prints have come out very nice.i think the silver is more gun metal grey and the gold is copper / bronze and really nice when printed, Kids love the green changing color in their hands or the warm water its a lot of fun.over all a great sample box and i would by a full roll of each.

i liked the fact that the reels where 250g instead of 1k as it takes time to use so much filament. The variety was well balanced giving a choice of different filaments in one purchase, the downside was the gold and silver were not like the metals i wished for but that is purely down to manufacture ability

They are really nice colours and all. But sadly three out of the four spools A tangled are tangled i’m very brittle. They keep snapping when printing

So far used the glow in the dark, heat changing and silver filaments. All three printed well at 215 degrees (like other reviewers have said). Here’s what I think individually:Heat changing - goes quite well from a darkish green to an off yellow (or dirty yellow)Glow in the dark - not great but does glow. 60 seconds under a bright light probably gives about 30 seconds of bright glow. Think of this as more of a novelty filament, maybe for kids stuffSilver - is not silver ( same as gold is not really gold). It’s more of a medium gray. These are not the metallic based filaments that you can get. Just coloured plastic.

sono rimasto molto impressionato dalla qualita del materiale ,giustificato anche il prezzo un po piu lelevato considerando il materiale , ho fatto ottime stampe di piccoli oggetti, consigliato per stampe di precisione di oggetti piccoli.

Top top je recommande merci je re commande

Gutes Produkt

El filamento es de buena calidad y viene muy bien empaquetado. Al ser PLA no es complicado de imprimir.Quizás tenga algo menos de adherencia entre capas que otros (en particular el termocrómico), pero nada preocupante.El filamento termocrómico es genial para hacer juguetes para los niños, ya que con el propio calor de las manos se puede hacer que cambie de color del verde oscuro original a verde claro o casi amarillo.El filamento fosforescente tiene un muy buen balance entre duración del efecto fosforescente y la cantidad de luz necesaria para activarlo. Es de color natural a la luz del día y emite luz verdosa en la oscuridad (después de exponerlo a una fuente de luz).Los otros dos son correctos, siendo el color oro y plata parecido a las armas de los muñecos de Playmovil (el plata es gris y el dorado es un marrón claro con alguna partículas brillantes). El dorado tiene un acabado superficial muy bueno donde casi no se notan las diferentes capas de la impresora. Ambos están muy bien para hacer figuras "metálicas", aunque el efecto final no es metálico.Un pack recomendable para tener filamentos que se salen de lo habitual.

Me gusto mucho, los compre para hacer pruebas y mas tarde tuve que comprar mas para unas impresiones concretas, el efecto del plástico térmico es genial, y el del luminiscente creo que es el mejor luminiscente que he probado.