Description
- .
- Most inkjet printer refill problems are in three categories: air lock, clogged nozzles, or overfill. The BCH priming kit fixes these problems if your printer produces a blank page or has stripes after a refill. SIMPLE, QUICK AND CONVENIENT. The tool kit can draw vacuum from the bottom of the cartridge and thus fix all three problems. The tool kit fits the cartridge tightly and you need to align the cartridge in the center, push down and push forward. Instructions below. REMOVE AIR LOCKS. After a refill, air bubbles may temporarily block the printhead nozzles. To get rid of them, you may sit the cartridge for few hours and do some head-cleaning. Or, you can use this tool kit to remove the air immediately. UNCLOG PRINTHEAD. When the old ink dried and condensed inside printhead, you can use this clip to draw the old gummy substance out and revive the printhead. CORRECT OVERFILL. If you overfilled the cartridge, you can use this tool to remove excessive ink. THIS IS THE CORRECT CLIP & NOT TOO SMALL. If the clips aren't tight, they aren't right. You may need to adjust the pad a little to create a good vacuum. The kit works for all printers that use PG-210 CL-211 PG-243 CL-244 PG-245 CL-246 cartridges, such as MX490, TS3300, MG3620, MG2522, MG3600, TS3122. Read below for more tips.
BCH Priming Clip Tool Kit for Unclogging Canon PG-210 CL-211 PG-243 CL-244 PG-245 CL-246 (XL, Regular, and Starter) Ink Cartridges
