GEDORE6576700 894 36 Single open ended spanner 36 mm

This is a very well made and aesthetically beautiful tool. Purchased to dissasemble fan/fan clutch on 2005 Dodge 1500 Hemi. See attached photo.

Let me start by saying that this is my 3rd water pump replacement on the same vehicle 04 Trailblazer ( lesson learn, don't go cheap on a water pump by OEM ). The first time I rented tools from the auto parts store and although they worked, it was a pain finding a store that had a decent set. Most of these are used and super abused, to the point that they barely work. The second time around, was a combination of buying and renting tool. This time I had the water pump holder and the wrench, but I guess they were cheaply made and were disposable, so order one of those kits that come with the holder and combo. The holder worked, but the 36mm wrench was more like 37 and made out of what felt like aluminum and could not hold it's shape, I returned it and got another set made by another company and had the same issue. After searching for a while, I came across this wrench, but because it only a few reviews I was a bit hesitant, but I thought, what do you have to loose. Let me tell, this wrench is not just a keeper, but a must for replacing the water pump. It's strong and fits perfect on the fan clutch nut. The wrench is a bit short for the job, but the end is narrow so you can use pipe as an extension, although to my surprise I didn't need to use one. I am shocked that there aren't more people using this wrench. i don't usually give out review, but had to on this great tool. Buy it, you will not be disappointed.

I purchased a few certain sizes for my air tools and these wrenches fit the requirement. Extremely happy with my purchase.

I thought it would be bigger so the arms would be narrower it was a tiny bit smaller than a normal wrench so back to plan A belt sander and old wrench to narrow the grip to get where it needs to go .like the wrench just not as special as I'd had hoped this one come off a loop of 12 wrenches and is being parted out for 10×the value of each .bit scammy .in short it is a regular wrench for around 8 bucks $7 shipped the loop cost $25 so ya there's that 😉

I removed the fan on a 2001 chevy Silverado 1500. It fit perfect. Just slipped on, put a c clamp on the belt and water pump pulley and gave the wrench a tap with a hammer. 1 tap and it broke free. Truck had been sitting for over a year. No problem. Good tool to have.

I used this wrench to separate the fan clutch from the water pump pulley on my 2001 Mercedes ML 320, with the help of a strap wrench on the pulley. I avoided other, purpose-built tools (i.e. a bar with a hole cut in it to hold the pulley by its bolts and a stamped 36mm wrench to turn the fan clutch) because I had read that some people find those tools break instead of accomplishing the job. I had zero concern this wrench would break - it's built tougher than my arm. However, this wrench is also too thick to fit between the fan hub and the bolt heads sticking out of the water pump pulley! I solved this problem by removing two of the four water pump bolts to make room for this wrench to turn through around 45 degrees without hitting any bolt heads. Then the disassembly and reassembly went off without a hitch.This is not a "pot metal" or garbage wrench; it looks well-made. I can't speak to how hard it will work before it fails, but based on look and feel and finish I'd trust it at least as much as I trust my Craftsman wrenches.

Great Quality at a Great Price. Well Designed. Worked Perfectly. Made Removing a Fan Clutch From a Water Pump Effortless.

I could not believe the outstanding fit and finish on this wrench. Without sounding silly, this is the most expertly manufactured wrench I have ever had. German engineering at its very best!

Overall satisfied with tool. Could be little cheaper.

we use them to vis des bolt 36! very usefull

very happy with this after a few months of use

Schlüssel ist Maßgenau und gut verarbeitet. Die gewohnte Gedore Qualität

Eerste aanzet op trapper overleefde hij niet. Deze hardheid zorgt niet voor vervorming maar breekt meteen🙈