ASRockZ690 PHANTOM GAMING-ITX/TB4, Intel Z690, 1700, Mini ITX, 2 DDR5, HDMI, DP, Thunderbolt, Wi-Fi, 2.5GB LAN, PCIe5, RGB, 2x M.2

I've been using the ASRock Z690 in my home server running Unraid, and after a lot of research, I found it to be the best option. It has everything I needed: six SATA ports, three NVMe slots, and ample PCIe expansion for any future upgrades. It's been running flawlessly for nearly a year now, and I couldn’t be happier. This board has been rock-solid, dependable, and has handled everything I've thrown at it without any issues. Highly recommended for anyone setting up a server!

i had bought this board on offer . however, when i built my pc there was a problem , the m2-1 drive wasn't being recognised . i contacted asrock and had a brilliant connection with a guy from holland . basically , it could be the wd drive sn850x or the board or the cpu i7 14th gen ,i purchased another 1TB drive, a sabrent to see if it was just the wd drive. It didnt work, he advised sending back the board. i returned the board and amazon said that i was entitled to a refund and repurchase , however, the board had gone up 70£ so i explained to amazon that i just wanted a replacement , this couldn't be done, but a work around they gave me a 70£ voucher , very generous. i repurchased the board . i can say it is brill. i installed two nvrme drives pci4. i copied a 5GB disk over by usb ,old usb drive, 5mins! , compared to 30mins on laptop ,then copied the same files between the two nvrme drives , it took less than 1 second!!!!i haven't filled in the gaming because i can't comment on that but as mb it is rapid

The motherboard I received has a bad memory slot that doesn't work.

using with 13600kf, works great

La mejor placa madre que compre para mi PC, solo actualizar la BIOS y hacer una buena configuración

You might find this an odd choice for an Unraid build, with only 3 onboard SATA ports, and you'd be right! But the RackChoice 2U Micro ATX (Mini ITX) server chassis I was using, model 238C-A, was really tight with 3.5 drives + mobo, even with the mini ITX form factor. I only used 3 of the 4 bays for 18TB HDDs, so 3 SATA ports was all I needed. I installed an ICY DOCK 8x 2.5 enclosure in the 2x 5.25 bays, filled with 8 SSDs, attached to a SAS 9300-8I HBA, and I'm good to go. The ICY DOCK SFF-8643 ports/cables help a lot with cable management, too. Using i5-12600K CPU.

muy contento con la placa la ensamble junto a un i5 12400f y ram ddr5 xpg sin novedad.

Works perfectly with i9 12900K out of box, 6400 ram no issues.