TECWAREGaming Chassis (Gen 3 VXR GPU Kit)

Ich habe dieses Gehäuse ohne RGB-Lüfter bestellt. Mein Ziel war es, ein B550m Steel Legend Mainboard mit einer Ryzen 5900X CPU und einer Arctic Liquid Freezer Wasserkühlung in dieses Gehäuse einzubauen. Als Lüfter habe ich mich für den Arctic P12 PST RGB Lüfter entschieden.Da ich nur MATX Gehäuse verwende, war ich natürlich gespannt was mich erwartet. Im direkten Vergleich mit dem Thermaltake S100TG.Also das Gehäuse hat wirklich sehr dünnes Blech aber eine schöne Mesh Front. Das Gehäuse ist auch nicht gerade groß, trotzdem ließen sich alle Komponenten problemlos einbauen. Optisch gefällt mir das Gehäuse sehr gut, aber nun zu den negativen Punkten:1. Unterhalb des Mainboards im Gehäuse befindet sich kein Loch für die Kabel der Frontblende (siehe Bilder). Also für Strom, HD LED, Reset usw.2. Das Gehäuse hat keinen Staubfilter in der Front. Also muss man sich selbst einen Schutz bauen und von innen mit Magnetstreifen befestigen.3. Die Arctic Liquid Freezer 240 Wasserkühlung passt problemlos oben ins Gehäuse, allerdings muss man dann mit den Schläuchen etwas fummeln, sonst bekommt man die Gehäusetür nicht zu.Pro:Gefällt mir optisch sehr gut, könnte aber etwas breiter sein.Keine nervigen Wind- oder Sauggeräusche der Lüfter in der Front.Super Luftstrom. Sogar eine AMD 7800XT Grafikkarte passt problemlos rein.Staubfilter unter dem Gehäuse und oben im Deckel.Fazit:Schönes kleines Gehäuse für den Bastler, der sein PC-Gehäuse etwas modifizieren möchte.Für das Geld kann man eigentlich nichts falsch machen, auch wenn die Blechqualität sehr dünn ist. Am Ende zählt das Gesamtbild und mir gefällt das Gehäuse.

Case molto compatto, ma che permette di mettere anche dissipatori ad aria come quello che vedete in foto. Il flusso d'aria è ottimo, abbastanza silenzioso e potete collegare le ventole al tasto reset in maniera da cambiare colori premendo semplicemente il tasto. I cavi dietro non sono troppo difficili da sistemare anche perché davanti all'alimentatore c'è lo slot per hdd che ovviamente non uso e quindi i cavi in eccesso li ho messi li.

This case is surprisingly great for the cost. It's very easy to work in and has a tonne of features you don't normally see in cheap cases.The glass side panel is very nice tempered glass, resting on two solid rear hinges which lift off vertically with ease. It swings closed and stops softly on rubber bumpers and stays closed on some strong magnets.The 3 pre-installed fans have both 3 pin PWM and MOLEX style connectors for compatibility. They're pretty damn quiet. There's ample room if you wanted to do a 240mm radiator, but that will cut into your max length for your GPU. With no front radiator fitted, you have room for a GPU that's 300mm long. Nice.You can fit a pretty tall tower cooler in this thing (165mm) if an AIO isn't appealing to you, and airflow looks really good.The PSU can be mounted either way up inside the "basement". If you're putting it on a desk, you can mount the intake facing downwards to draw through the mesh screen on the bottom. If you're potentially putting it on carpet, you can flip it and draw air through the perforated basement top. Even if you're using a crappy non-modular PSU with ketchup and mustard cables, there's space to hide your sins in the covered area. There are plenty of pass through holes around the perimeter of the motherboard tray, so no worries about routing.Also inside the basement resides the HDD cage. Wow. This HDD/SSD mounting space is so well designed and very easy to install drives into. You can flip the entire case and set it upside down. The cage is held in place by a locking lug system stamped into the sheet metal of the case and secured with a couple of HDD screws. This makes it simple to take out the cage, fit your drives and put it back while the whole thing is inverted. Perfect. There's also a separate space for SATA SSDs in the back panel area behind the motherboard tray, which looks easy to fiddle with without having to go digging.The back PCI-e slots are punch-out plates that you have to work free and break off, and they're pretty much the only place on the case you could conceivably cut yourself. Every other edge is either blunted with a deburring tool or rolled for rigidity.The feet on the case are solid plastic with rubber feet, so there's no worry about scratching your desk or having the tower slide around once it's situated.Building in this thing was a breeze. With both side panels off, there's no problem reaching anything, and there's no awkward screwdriver-fu to be done. There's lots of space in the back panel area and there are loads of punched tie down points for zip tying your cables to.For a cheap case, this thing is astounding. The style is clean and understated while showing off the goods with that big glass side panel. It fits in that perfect aesthetic sweet spot of having all the features you could want for a build without looking all "gamer-ish" and angular, like batman's codpiece. I can see this sitting well in a professional environment and still turning some heads.The only thing to be aware of is that the top panel is open for exhaust air with no mesh by default, so settling dust may enter the case from above while it isn't in operation. While the fans are running, the case maintains a positive internal pressure, and the front of the case is filtered, so no problem if the machine is on. If you intend to power this machine down while not in use, it might be advisable to stick a magnetic mesh screen on the inside along the top.Overall, I'm incredibly happy with this case. It beats out basically every other sub £60 case I've ever bought. I'd put the quality on par with the cheaper offerings from brands like Fractal and Cooler Master, which is high praise.

Da tempo cercavo un case nuovo per il mio PC che fosse accattivante e già dotato di ventole e possibilmente di 2 slot USBA 3.0. Questo prodotto ha fatto al caso mio. Prezzo veramente ottimo ed arrivato integro nei tempi previsti.Il design è molto bello e vi ho installato senza problemi la MoBo mATX (fate attenzione perchè questo modello di case supporta solo le mATX) e tutte le componenti (verificate bene le misure prima dell'acquisto).Le 3 ventole garantiscono un ottimo airflow e i giochi di luce sono accattivanti. Unica piccola pecca essendo un case di dimensioni ridotte il cable managment può risultare un po' difficoltoso ma nulla di che.Al momento ho spostato la ventola posteriore sulla griglia superiore (ricordatevi di comprare anche un filtro magnetico) per poter installare un dissipatore liquido da 120 mm (ci sta preciso ma fa il suo dovere). Sono veramente molto soddisfatto del mio acquisto e consiglio caldamente a chi cerca una soluzione economica ma esteticamente valida per il suo PC.

C'est une pure surprise je l'ai acheter sans réelles attentes dessus pour pouvoir me faire une config en mATX et forcé de constater qu'elle fait très très bien son travail avec un style incroyable digne de grande marque de fabriquant de boîtier pc avec une belle finition, les ventilateurs en rgb et non aRGB malheureusement mais quand même possible de changer les couleurs directement sur le boîtier lui même et est quand même assez grand avec un assez bon airflow et possible de mettre du stockage en HDD, sans parler de son prix évidement extrêmement attractif qui battra d'autres petites marques de moins bonnes qualité on va dire.Je vous conseil vivement cette marque pour du micro ATX !