MotorcraftYH-1829 A/C Blower Motor Switch

This works great, it fixed my AC.Issue in my old 2012 F 150.

Exact replacement for Ford ac blower control system, worked perfectly

After years of the fan blowing on high with no control, my fathers 2009 Ford F-150 King Ranch FX4 5.4L V8 with electronic climate control works as designed again! Tried to "re-flow the solder on several of the OEM module main connections as someone suggested might work, but it did not help in this case. The control module is easy to access and replace, just takes minutes. The part/model numbers are a bit confusing for the module though. The numbers on the our OEM module were "9L34-19E624-AC", which appeared to cross to a YH-1827" or a "YH-2060" number depending on what part listing was viewed (even by VIN). The Amazon listing was for a "YH-1829". The plastic bag it comes in does have a stuck-on paper label listing the "YH-1829" number, but the plastic bag ink printing states it is a "YH-2060" with "BL3Z-19E624-B" also listed. The new module in the bag has basically the same OEM number molded into the plastic, which is "9L34-19E624". The new module did resolved the "fan blowing on high with no control" issue, so it appears the M/Ns, 9L34-19E624-AC, 9L34-19E624, BL3Z-19E624-B, YH-1827, YH-1829, and YH-2060 may all be compatible for a range of Ford vehicles which uses one of those numbers in conjunction with a Digital/Electronic Climate Control System suffering from similar control issues. As always, do your own research though! Good Luck!!

Fit in my 2013 f-150, now I can control fan speed again.

My a/c blower motor fan just stopped working suddenly. I went to "You Tube" to see if others had this problem and how to fix it. It was revealed that the A/C blower fan resistors just die on their own or only operate at the highest speed setting. Well, I bought a "made in china" resistor from e bay at a very cheap price and it lasted 1 day and died. I followed the sage advice of several mechanics and learned a valuable lesson, replace OEM parts with OEM parts. I bought this resistor from Amazon at a very good, competitive price, installed it in under 5 minutes and my trucks A/C, heater, defroster is now working perfectly. If your Fords a/c or defroster blower fan is only working at the highest speeds then you need one of these. Learn from my mistake, only OEM as you get what you pay for!

I have a 2013 f 150 platinum with dual control and automatic temp .The blower was stuck on high . This switch came in a plain box with a sticker on it ( Motorcraft YH 1829 ) .Seems to be some confusion on what number to use . The switch does not have any markings or name brand on it . This was an easy install and works great .

The Motorcraft YH-1829 A/C Blower Motor Switch proved to be a perfect fit for my 2014 F150. It installed effortlessly and restored the A/C system to full functionality. The switch operated smoothly, allowing easy control of the blower speed without any issues. Its reliability and OEM-quality construction impressed me, ensuring consistent performance. If you're in need of an A/C blower motor switch, I highly recommend the Motorcraft YH-1829 for its excellent performance and peace of mind.

Spend the $$ and buy this oem part. Aftermarket parts will save a few bucks but will fail within 20k miles and don't really fit the electrical connector right. This fit my 2017 expedition with automatic electronic climate control. Same as F150. I replaced the original at 80k with an aftermarket unit and it only lasted 20k before failing in hot summer weather. This is oem and should last longer, and it fits better.

Amazon said Black one fit my truck. IT DIDN’TAmazon said this one doesn’t fit my truck. IT DID!!Know your part.Came in packaging. Said made in USAPretty easy to installFixed an intermittent fan totally working or not working issue on my 2014 Ford F150Wouldn’t want a failure on a hot day with a pet in your vehicle.

This item worked perfectly in my 2010 Ford F-150. Heater was stuck in high. But a cheaper no name one on Amazon and it did not work. Returned it. Got this one very quick was more money but it worked instantly. Heat now goes up and down again !! Worth the extra money and cheaper then a dealer repair. Took me literally 3 minutes to replace with a 8mm wrench.

Blower would stay running even when switched off. Super irritating to have the fan blowing when not needed. Three times the price through the local ford dealership. Did not want to put on an aftermarket part and have to do this job again. Easier if you remove the glove box to install. Worked like a charm. Blower now shuts off when I am not needing the fan.

Easy to install and definitely good value. I’ve tried Standard Motor Products PN RU893 and every one of them failed. At first I was told the blower was drawing too much current under load, so I tested the blower and there was nothing wrong with it. Then I was told to replace the blower along with new resistor and same result with the SMP resistor burning out. So I read some reviews about using the factory Motorcraft and BAM that’s all she wrote. After market resistors are garbage. Motorcraft is the way to go.

Used to replace in my 2013 F150 for AC/ heat easy to install all tools provided and way! cheaper than the dealership wanted.