3D Resin Flex Plate for Elegoo Mars 3, Mars 3 Pro, Mars 3 Ultra 4k | Fula-Flex: Resin Edition | Stainless Steel Magnetic Bed Platform | 150 x 95

I ordered the Fulament 3D Resin Flex Plate for my Anycubic Photon S, but unfortunately, I received a messed-up return from someone else. I contacted their support team, and they promptly sent out a new one without any hassle. The product itself works great—it's a fantastic addition to my 3D printer, making print removal so much easier.Overall, the customer support was top-notch, and the product quality is excellent. A wonderful experience from start to finish!

This so much better than scraping the build plate. Resins that require longer burn in and exposure are the worst. This is so much better. Installation was easy and the resin pops right off, easy to wash at the same time as well.

The media could not be loaded. When I saw this, I was skeptical but after using the Fula-Flex build plate I am totally sold. I have found even when being as careful as possible scraping your parts of the bed always affected both the part and the bed. However, after several prints I am amazed with how well this works. The magnetic surface holds the flexible build plate very tightly and the overall surface is perfectly flat - even if you had scraped up your original build plate. It is simple to install, just clean and attach the magnet to your build plate, download and print the spacer (you’ll want to do this before you attach the magnet) and install the spacer the under the z axis sensor and relevel. I had to adjust the bottom UV curing time slightly but after that it prints as good as ever. I do not see any difference in the print quality.Removing your prints is the best part, just a slight flex of the plate and your parts will come right off without damaging even the most delicate areas of your print. I’ve learned to hold the plate with the parts facing up so they don’t fall off – see the video. For parts where the bottom surface is important and / or that have a large flat surface this works so much better than having to use a scraper.The support is great to, I had a few questions, and their staff has been very responsive and knowledgeable.If you are serious about 3d resin printing I highly recommend this!

Haven't had it long enough to say anything about the adhesive backed magnet but no issues with some 50hrs of printing.One thing of note is that there is only a small margin of clearance for the little tab on the plate to fit in the tank. For me it was ensuring the tab is pointing towards the back of the tank, otherwise it catches the inner lip. This could lead to damage but I do not see how to design around it, not having a tab would make removing the spring plate more difficult. Perhaps making it shorter and wider in future revisions would help.Leveling was easy, due to the spring loaded build assembly on the Mars 2p, no spacer is required. Just level the bed raise it up, attach the flex plate, and re-level. Easy, done.As far as the other reported issue of the logo being printed to the models, I have not seen this myself. I do typically print with skids or raised supports, and generally the build plate is the bottom of the model so I wouldn't care if it had a bit a print on it. Have not seen the logo on the bottom of the skids myself. It appears laser etched, and is smooth to the touch with the rest of the plate, your experience may vary.I use alcohol to clean and would not recommend immersing the magnet in a solution of any kind, as is typical in the cleaning units. It would likely cause more rapid wear on the adhesive.So in summary,Pros+ Works as advertised.+ Simple installation.Cons-Limited clearance with the grab tab requires attention to plate orientation prior to printing.

Tried this with 3 different settings on prints. All of them failed. This is a great idea in theory, but like others the plate will move on you and even though a millimeter or two may get printed it then completely shifts on you and then breaks off of the flex plate. Ultimately it destroyed my film (which was brand new). Not only will this company not pay you to replace the film, they won't pay you for all of the resin you lost. Save your money. It will literally cost you twice as much as this product to replace what this thing destroys.

I rarely write reviews online unless there is an extraordinary positive or negative. Long story short, I had an issue with installation and emailed their customer service. I heard back within a few hours with some sound recommendations. It is because of the extraordinary customer service that I felt compelled to write a positive review. That seems to be a rarity with a lot of companies these days.Ultimately, I discovered that it was user error... Everything works great now! The product itself is worthy of recommendation as well. Being able to remove the fixable plate allows for less cleanup and easier removal of prints from build plate. If there is a size that fits my Qidi iBox Mono, I will be getting another.

I really like this product! I bought 2, I've installed one and am installing the other today. Once I got it working it's amazing! I am still kind of new to resin 3d printing, but I found the installation instructions a bit cumbersome, and the advertised 3 hour response time for support tickets I think is a myth. But solo troubleshooting comes with the 3D printing territory. I've seen some people complain about the branded laser etching on both sides, maybe they changed their mfg because neither of my plates were etched on either side which I'm happy with. If it helps anyone in the future, to get it working with the M3 plus, I pressed home, tightened the build plate, raised 1mm, then set z=0. Your mileage may vary but that's what worked for me after a day of working at it. Good luck out there with this great product!

I am about to begin the process of trying to scrape the magnet off my plate, because this thing does not work. Every print I have run since installing has had the plate slide, causing failures.I have been able manage a few okay prints, but even they are crooked.Overall, do not recommend.