Everest Media SolutionseasyJACK - 90° Angled Speed Termination Tool - To Be Used ONLY with Everest Media 90° Angled RJ45 CAT6/5e & CAT6A Keystone Jacks (B087N7QQD2)

Good Quality Product.

No puedo creer tanto tiempo de creer que no necesitaba esta herramienta. Total. Que tanto es hacer 8 impactos por cada conector. Lo que primero me llamó la atención es lo delgado del cuerpo, se acomodan en las placas para 6 conectores. Y la rapidez en lo que se preparan los conectores es increible.

I needed something to use to help terminate network cables at home. This makes the job very quick and easy. Also, using Keystone jacks are a much better option for terminating ethernet cables versus rj59 connectors.

I'm a geek with fairly extensive experience with coaxial networks and that probably helped somewhat, but I had never put cat6 jacks (keystone or otherwise) on Cat6 cable before. The above images are the result of using this product with one of their keystone jacks.For a first time users, it went extremely well. I only had a couple jack early on in the process that failed, always the blue pair with them (last pair I insert before punchdown) so I suspect that was my error.Some notes for others - things I did learn the hard way.To cut the Cat6 shielding, I used a tool from trueCable. You have to have the dial on it set just right so it only scores the Cat6 shielding or the blade can nick the wire pairs. The proper setting seems to very by Cat6 maker so practice first. Twist to finish breaking where it scored, save the empty tube.It probably doesn't matter if you use the T568A or T568B standard as long as both ends are terminated the same, but I always just use B because compatibility is 6P4C color codes doesn't matter to me.When untwisting a pair to lay it out in the jack, use the empty shield tube that you cut off. You can use your fingernail to start the separation, but then put the empty tube over one of the wires in the pair and it just easily separates the pair.When doing T568B I do the orange pair first, making sure the remaining Cat6 shield is very close to the back of the jack. Then I do the brown pair, then the green pair (same side as brown pair), then finally the blue pair (same side as orange pair).With one hand I hold the tool that does the punch-down and with the other, a hold the shielding of the Cat6 where it meets the keystone jack.After making the connection, I use a Klein Tools Scout Pro 3 to verify the termination is correct - and then insert the keystone jack in the plate and re-test. First few I made I had a high failure rate with blue pair but after the first few that stopped being an issue.Speed I'm getting during early AM hours when no one else is using the Internet maxes out the Internet connection, and sustained large downloads work well, so this tool with the matching jacks seems like a good combination.Sorry for being somewhat long-winded but there doesn't seem to be a good instructional video for this specific tool, so I thought I'd share my experience using it for the first time as a n00b.

Very please with buying this. One handed use, great for working on ladders and saves A LOT OF TIME.If you've ever done wiring / termination / network keystone jacks, you'll understand punching down is no longer the way to go. Go for it - get this, and get the job done FAST. One press and you're cut and terminated properly with speed!!!

I've used tools like this in the past. However, this tool and using the Everest K-Stone jacks was so easy to use and it makes a perfect connection and wire trim. These Everest products are a must have for doing ethernet installations. It makes it so easy you won't believe it worked! I had to adjust the tool for cat6A jacks to fit in the tool.