Brand: PCE Part Number: PCE435.1061 Part Type: Cylinder Head Combo Camshaft Included: No Intake Manifold Included: Yes Fuel Supply Style: Carbureted Intake Material: Aluminum Intake Finish: Satin Carburetor Quantity: 1 Air Intake Style: Single-sided Air Gap Intake basic operating RPM range: 3,000 to 7,500 Intake Manifold Height: 6" Intake Manifold Model (Description): PCE - Shoot Out Series Carburetor Flange: Square Bore Timing Chain and Gear Included: No Lifter Included: No Gasket Included: Yes (head and intake only) Cylinder Head Style: Assembled Straight Plug Cylinder Head Material: Aluminum Cylinder Head Finish: Natural Combustion chamber volume: 64cc CNC Machined Combustion Chamber: No Intake runner volume: 210cc CNC Machined Intake Runner: No CNC Machined Exhaust Runner: No Intake Port Shape: Square Intake Port Location: Standard Exhaust Port Shape: Square Exhaust Port Location: Standard Spark Plug Style: Stock Comp. Valve Job: No Intake Valve Included: Yes Inlet valve diameter(inch): 2" Exhaust Valve Included: Yes Exhaust valve diameter(inch): 1.6" Inlet valve angle: 23 degree Exhaust valve angle: 23 degree Valve Spring Included: Yes Outer Spring Diameter (in): 1.45" Damper Spring Included: Yes Springs Per Valve: Dual Retainer Included: -Yes. Retainer Material: Chromoly Steel Lock Included: -Yes. Lock Style: 10 Degree Valve Stem Seal Included: Yes Valve Stem Seal Style: Positive Stop Rocker Arm Included: -Yes. Rocker Arm Stud Included: -Yes. Rocker Arm Nuts Included: -Yes. Rocker Arm Nut Thread Size:7/16 Guide plate included: n/a Pushrod Included: n/a Valve Cover Included: Yes Valve Cover Material: Aluminum Valve Cover Finish: Natural Valve Cover Mounting Style: Perimeter Bolt Accessory bolt hole drill: n/a Valve Guide Included: -Yes. Valve Guide Material:Bronze
| Manufacturer | Speedmaster |
| Brand | PCE |
| Product Dimensions | 23 x 17 x 12 inches |
| Manufacturer Part Number | PCE435.1061 |
Q**K
Not for a gen 1 sbc 350
This is for a gen 3 sbc. The casting isn't great and I couldn't use the intake provided as it didn't fit with my block. The gaskets included are garbage. Still, cheap aluminum heads that flow well and will work with patience and some ingenuity
L**D
THESE HEADS ARE GARBAGE, AS WELL AS THE INTAKE
THESE ARE DEFECTIVE FROM THE UNBOXING. 1. I HAVE BEEN A MASTER FOR 34 YEARS. A.S.E. THESE HEADS HAVE THE INTAKE AND EXHAUST PORT ROCKER STUDS DRILLED AND THREADED ALL THE WAY THROUGH. SO YOU WILL HAVE WATER AND VACUUM LEAKS. 2. THEY ARE DRILLED FOR LS MANIFOLDS ALSO DRILLED ALL THE WAY THROUGH SO GEN 1/2 MANIFOLDS WILL LEAK FROM THE LS PORTS. WATER! THE INTAKE THEY GIVE YOU WILL NOT SEAT THUS BOLT HOLES WILL NOT LINE-UP. TWO SETS OIF INTAKE GASKETS FOR FRONT AND BACK OF MANIFOLD. THE VENDOR WILL NOT RETURN EMAILS THIS IS A NO STAR RATING... THE ROCKERS ALSO NEED CLEARANCED OR THEY WILL RUB ON THEIR HEAD BOLTS......FULL REFUND. SKS MOTOR SPORTS
G**
The add is wrong according to speedmaster the heads are only a 205 CC not a 210cc head
According to speedmaster those are 205 CC heads not 210 cc's
Trustpilot
1 day ago
2 months ago
