Creality Ender 3 Glass Bed Upgraded 3D Printer Platform Tempered Glass Plate Build Surface with Glass Clips, 235x235x4mm, for Ender 3 Pro/V2/S1/S1 Pro/V2 Neo, Ender 5 Pro,CR 20/pro Heated Bed Glass

After using a PEI sheet for a year, I upgraded to the glass bed and my prints automatically improved because the glass is a much more level surface than a flexible PEI sheet. The bed level mesh went from a variance of 0.4 down to a 0.1 with the glass bed. For sticky prints, I just toss the glass bed into the freezer for 15 minutes, and they slide off. No glue necessary.

No adhesives, release agents, tape, hairspray, gluestick, or anything else. This bed just works. No issues at all with PLA or even PETG directly on the textured side. Prints pop right off after it cools down.

I have now used 3 different build surface products on my printer. I used the original magnetic build surface that came with the printer. Thin (inexpensive glass) that I removed from a dollar tree picture frame, and now this glass bed.The original build surface was aweful It caused significant issue levelling my bed (uneven printing) and lots of adhesion issues and lifting on broad prints.The thin glass I used actually worked really really well, but was a little but narrower than the bed width, and a couple inches longer (initially I just let it hand off the back of the bed until I dropped roll if filament on it and it cracked at the back, but was still useable.)I bought this CREALITY glass plate to replace the thin, broken off glass. Overall, it DOES work. I am not having leveling issues with it. I have tried to print on both sides of the plate. My prints stick fine to the textured side - no lifting etc, but they can be REALLY really hard to get off, even after cooled down - and I have to wait till it cools ALL the way down to room temp, which can take a long time. I print a good bit of broader prints (coasters for example) and they can be tough to get off. On the reverse, smooth glass side, I have less sticking issues, but I end up with a little bit of lifting so it's a catch 22, and why I am torn.I don't like the way the textured side gets marked up either. Every print I've done is leaving border marks on the bed surface and those marks get transferred to the bottom of subsequent prints. It's the bottoms that are not seen, but I love to look and feel of a nice smooth bottom surface, so the extra marks bug me a bit.Smaller more sparse prints work GREAT on this bed. I did a plate full of little ghosts for halloween and they printed great, didn't lift off at all, which prints like this are prone to do, and while these took a little pressure and rocking to get off they did come off fine.All in all, though the bed is doing it's job, it heats great, prints do stick and don't lift.

LE quedo perfectamente a mi ender 3 neo y la adesion es lo mejor solo tienes que esperar que enfrie para poder sacar la pieza muy facil. llega muy bien empacada

After being an ABS slurry user for years I have converted over to this build plate exclusively on all my FDM printers.Now I 99% of the time use ABS or ABS/Carbon and I have had zero problems with adhesion since setting my Z offset closer to the build plate. After setting the Z-Offset with the nozzle and bed at print temperature I then sneak in another notch of Z closer to the bed. Works every time!Wait until the bed is at ambient temperature and prints pop off with minimal effort.There are impressions in the build surface from the previous print, but with another print on top it makes no difference to the adhesion (which is fabulous!). Every dozen prints or so I use Invisible Glass cleaner on a ROOM temperature build plate, leaves it spotless!I print at 260C Nozzle and 110C build plate (like I said I'm 99% ABS here)

Fit perfect

I got tired of flipping my Ender S1 Pro's stock PEI plate over, to glue the bare metal.So, I bought this. Ironically, prints stick so well that I haven't had to use a glue stick ONCE since buying it.Go figure.XD

Way more than 4mm thick even bottomed out it scratched the glass so I had to adjust the adjust the height of the motor