Alnicov Unfinished Electric Guitar Body for Fender Telecaster TL Guitar DIY Accessory Mahogany Wood

The media could not be loaded. The body dimensions are precise. As per item description, the neck opening is 1,5mm smaller than Fender on each side. A Dremel and sand paper roll will do the trick. Also the neck pickup opening is for a single coil so I enlarged it with a router to fit a humbucker. Keep in mind this is not a finished product, so lots of sanding is needed to get it ready. I finished it with rub on poly gloss. Turned out pretty spectacular in my views.

Had 2 finished Fender bodies arrive damaged. This was packaged to arrive unharmed. Ready to paint and put together. Very happy.

The pre-drilled string holes and the bridge plate screw holes are in the wrong position. They are too far back and the screw holes should be behind instead of in front of the string holes. Unusable. Too bad, because the wood is beautiful.

Just got guitar body was so excited at first look seemed really nice body is heavy and thick. I put it on the bench and tried to put the neck on did not fit tried a second neck not fitting. Tried the third neck and barely fit neck pocket was a little tight but it just did not look right after looking a little closer and getting out some tools found out they did not cut the pocket correctly was cocked and did not line up straight I have the tools and fixed the problem but for someone who can't do this I would not recommend

Out of two guitar bodies, both were unsuitable for being used for a natural wood finish. Both had deep scratches on the front and back, to plane/resurface both would leave them too thin to be usable. Both were beyond sanding out. One had a hole that had been filled with sawdust and wood glue. Even for a painted guitar these were far more involved to repair than others I have purchased elsewhere.

A sweet way to piss away $100. An absolute joke

This is the first time ordering here. The item arrived on time. Quality is top notch. I’m definitely will be ordering more!

Well packaged and fast delivery, great mahogany body, all holes line up perfectly, will definitely buy again from this seller. Thank you.

Hier das wichtigste. Der Body kommt wie beschrieben im Rohzustand geschliffen. Mein Body hatte kleine Macken auf der Oberseite und Unterseite. Für jemanden der einen Klarlackierten Body haben will ist die Qualität nicht gegeben. Wer aber einen lackierten Body erstellen will der sollte hier zuschlagen. Der Body ist 44mm dick, entsprechend somit den Fender Abmessungen. Ich habe eine Kopie meiner 1966 Telecaster angefertigt. Somit etwas Relic ins Geschehen gebracht. Obwohl mein Original Body Esche ist, klingt der Body aus Mahagoni identisch. Zu erwähnen ist das keine Bohrungen zum Tonfach erstellt sind, muss man somit selbst bohren.Zu dem Preis sollte jeder zuschlagen.

Don’t expect it to be finished exactly as the photos suggest, the body I received doesn’t have any holes drilled anywhere.This is a very minor discrepancy however compared to the fact that this is not mahogany but several (12 in my example) layers of plywood sandwiched together in depth and glued as two pieces prior to shaping/routing so 24 piece plywood body! It is very soft and easy to sand but don’t expect anything special, it chips very easily.If I had known this prior to purchase I would have looked elsewhere but because I’ve already started sanding and shaping it I will carry on my build as planned. I only recommend this body if you want the lowest quality body that is already routed for pickups and not already painted.

Der Korpus besteht aus einem wirklich schönen Holz und klingt auch ziemlich gut. Leider sind keine Löcher für die Verkabelung gebohrt, so wie meiner Meinung nach auf den Artikel Bildern zu sehen ist und das Holz ist wirklich sehr hart.

Very nice wood when sanded, looks great, nice grain just sand neck pocket to fit your neck size. Very pleased, will probably get another at some time to do a different colour.